As an ex John Deere & Massey Ferguson Technician And spent a lot of time driving different makes Including fendt MF JD NH and Case with a 7719 you can’t go wrong as long as your happy with a slightly smaller cab than most on the market. And you have a operator that will drive it correctly, keep...
10 meter reel from Amazon two small exhaust clamps to cab handle frame, and about a meter of hydraulic hose back to one of the blanks on air tank. It works a treat.
Running a pro-forge front disc with hydraulic adjustable paddles and two rows of discs, have cut out small sections on the paddles as do a lot of reseeding straight into grass leys to help rip out old/dead grass and other previous crops. The discs seems to do a good job cutting up before the...
I found in short crop had to weave and drive like there was no tomorrow no matter what the row size was ( not nice for the tractor or baler !!) but it’s the only way to get a good start on short stuf!! :facepalm:.
As regards to the net in light crops found it worked better missing out one of the net tensions bars and feeding a little bit of grass in as net starts.
There was an update kit to fit early varios to help stop short grass going under the rollers found that helped a little. Also I found had to adjust back roller on rear door slightly to run more to left side as belts would alwaycross to the right when they overlapped on short crops. Then if I...
Been running a set of 3meter Rol-ex disc’s for just over a year with a seeder unit mounted on it. It’s done around 700acre and so far so good. Stubble is no problem but When doing old grass leys found had to do two passes to get a good finish When doing grass to grass. So running set of front...
This is just for a bit of fun and not for raising controversy please!!
Been thinking about this for a while now after spending hours driving and repairing various makes of tractors.....
If given the choice to build your ideal tractor from choosing components from various manufacturers, what...
First test run Tonight for the crop press/ applicator made up from some bits lying around and an old scraper frame.... just in time for the big crops (y)
Thought I’d knock together a wrap carrier additive applicator and crop press for front links from some bits laying around, frame is an old scraper.
Not finished yet but it’s getting there (y)
The 3D wrapping system on the Kuhn definitely makes a difference. Carting bales from field last week were a mchale Fusion and Kuhn FBP worked side by side. Birds had been at both sets of bales, you could see grass tufts been pulled out from fusion bales everywhere, were as the Kuhn bales hardly...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.