Search results

I heard the early ones were troublesome but now have had upgrades, and I’ve been told are sorted, are they better? Anyone using one and what’s your verdict on it?

Looking for some gloves which are comfortable to be worn all day, waterproof, protective but sensitive and dexterous enough to use for more delicate tasks such as being able to turn a nut etc. Any recommendations please?

Sorry to spam the forum with threads about combi drills on sticky soils, but just come across a Weaving tine drill combi drill. I seen to remember in 2012/13 people were saying these were good in wet conditions. Any user experiences? I think I’ve narrowed it down to either a Weaving combi or a...

I’m looking at buying a used one of these for drilling into ploughing on wet, sticky clay soil. How do they perform with the Rotec coulters on? Also, is the drill easy to remove from power harrow?

I have just changed my sprayer and would like to keep the wheels from my old sprayer, only problem being is the new sprayer is on 10 stud axles, my existing sprayer is on 8. I don’t want to keep the wheels on my new (used) sprayer so would like to put them onto my old sprayer so I can sell it. I...

Thinking of getting a little van for the farm for a general runaround for collecting parts, etc. instead of using my 4x4, but I’d like it to be able to pull the fuel bowser (1600 kg full) occasionally when my wife takes my 4x4 and takes the kids on holiday, normally at combining time. Budget...

Is it possible to swap the T bar armrest on my 7620 to a multipad armrest? If so, how much would it cost?

Seen one advertised which looks tidy and with sensible hours on, were they any good and what goes wrong with them please?

Looking to fit a loader on my tier 3 6470, is there anything available?

The whip (I think thats what you call it) fell off my tractor the other day and can't find anything similar. The radio is a Motorola DM1400 on VHF and dont want to get an aerial with the wrong frequency. Also don't want to buy the whole assembly, just the whip and/or the spring

I’ve got a tractor which has several accessories fitted and have been terminated at the battery, this has made the battery box quite congested with wires and fuse holders, etc. Is there something I can fit or make to make a dedicated power point for connecting these? Also, is there something I...

Just looking at one of these and have heard they are generally good machines, however, they lack dump angle and the rear pickup can't pick up a loaded trailer, are these comments correct? What do others think of them?

They have a machine there which I am interested in, however they are 5 hours away and with current circumstances I think it’s difficult to look at machine. So really just asking on here what they are like to deal with and whether I should be confident dealing with them without viewing. Thanks

It has a ‘A’ on the hubcaps

Normally sell our AA calves (about 55 per yr, although would probably increase in future) at weaning but I’m wondering if there’s any money in keeping them to stores/finishers? Thinking to feed them on a grass/maize silage ration, plenty of straw from arable side, muck to go back. We do rent...

Sorry if this has been done before, but the compressor has failed on my 6480. Been told a landrover comoressor works for a fraction of the price as a genuine one, or theres springs for similar money to the KR compressor. One of my drivers suffers from a bad back so would the springs be equal or...

Our plougg is terrible for blocking between mouldboards and skimmers, especially on grass. The height of skimmers is set about right, its the front/back clearance that could do with increasing. I see there is anothrr set of holes on brackers, are they for this purpose as ive not seen a plough...

I’ve got a stone drive which I’m sick of filling potholes in, wondering rough price to have it tarmac’ed.... professionally! It’s about 500 metres long and 3.5 metres wide

Looking to make a front mounted toolbox to go on front linkage, and have loads of empty oil drums around, has anyone successfully made a front mounted toolbox from one. Would it be strong enough? If so, pics and instructions please

My nephew is looking to buy his first car in next few months when he's passed his test and is now wondering what car to get. Ive suggested a little 4x4 like Freelander, safer on country roads as better visability, and better suited for dealing with potholes, floods and snow Budget is around £4k...