Search results

Hi all,I have a 2013 knight trailblazer 4200. The cable that connects from the mueller control terminal to the sat receiver is damaged and may be hard to repair as it’s broke at the resin behind the pins where it meets the cable. Any thoughts were I’d get a new end or complete lead? Thanks.

I have a 2013 4200 trail blazer sprayer which has recently started leaking air when the hand brake is applied. The air is coming from the bottom of an alloy block below the air tank, at the rear of the sprayer. The brakes have now started to not release properly the odd time when braking...

Hi all, Having problems with our 2013, 595 Opico drier. Dried first batch of barley no problem, then second batch brought up ‘plenum hot’ on the display. This message is displayed in the sequence after setting grain type and temp settings, then selecting batch drying then hit status dryer goes...

Just wondering if anyone has ever done this. Only ever harvested with a claas combine (Dom 108 and lex550) but find on laid crop it snags on outsides and reel would benefit from extra tines/blades on outside of the reel like the image below. I can use the dividers to lift and divide the laid...

We have recently bought a 7718 dyna 6. Full throttle is 2150 rpm and will stay at this at 50k and not drop like the old 6480’s. I haven’t much experience of the dyna 6, only that I have driven my neighbours d6 6480 and it would have sat at 54k and pulled back the revs with the foot throttle...

Hi all, The plates on my impeller drum have wore through and one has ripped open and started clanging when running. Has anyone ever replaced these and have any suggestions to the best method to remove plates and put on new ones. Does the whole drum need to come out the side or can it be done...

I’m having problems opening the grain tank on our lexion 550 It had opened and shut fine a week ago before and after washing Now the lid will only open by pulsing the open button constantly with the lid only lifting a small bit each pulse, therefore taking about 5 mins to open lid!! The...

Hi all, had a burst hydraulic hose that feeds the header from he combine. It's the smallest hose that feeds the header down the trunking and into the header multi block. Got it mended but there has obviously been some dirt in the line after putting it back together that has got into the valve...

As the title suggests I have an egg shell like sediment in the rubber hosing that's feed the boom sections on my sprayer. I have purged and agitated with "all clear extra" tank cleaner for about an hour and rinsed with about 5000 litres of water and still the small egg shell like particles...

As the title suggests, the air con on my 07 claas lexion 550 has stopped working I have ruled out some of the obvious problems 1) the gas has been checked and is fine. 2) the air con unit that runs on the fan belt works, as I rigged a battery to get power to it an unit engages and gives cool...