Search results

Anyone using Patchwork’s black box marine for variable rate application on Fert spreader and section control on sprayer?

Hi, has anyone got a bale tipper they’d sell for a Mchale hs2000?

Anyone got a drawbar kit for sale to connect a mchale hs2000 wrapper to a mchale F550 baler? Thanks

Has anyone drilled winter triticale seed at the end of February? Im 1 ton short of spring seed but got a ton of Cyrkon winter seed. Spring seed is seemingly sold out, the last of it reached £800/t. I know it needs a frost which we’ll probably get before spring. It’s for wholecrop and is about...

Has anyone drilled winter triticale seed at the end of February? Im1ton short of spring seed but got a ton of Cyrkon winter seed. Spring seed is seemingly sold out, the last of it reached £800/t. I know it needs a frost which we’ll probably get before spring. It’s for wholecrop and is about 20%...

Iva a mf 6480 with a datatronic 3 screen. Screen stopped working today, ment to be 2 12v feeds to screen, one from ignition and one from battery. Getting 12v from 1 wore but only 1.3v from the other. Anyone else had issues? Bloody pain as linkage or spools won’t work without it!!

I’ve just acquired a JCB 526 56, I’m looking for an operator handbook if anyone has one.

I have a Massey 130 that my son is restoring, I'm looking for a black and silver grill on the front that's behind the headlights.There was an article on the 130 in the classic tractor magazine, which I thought I'd kept, it had details of someone in Derbyshire who makes them. Anyone know who that...

I have a Massey 130 that my son is restoring, I'm looking for a black and silver grill on the front that's behind the headlights.There was an article on the 130 in the classic tractor magazine, which I thought I'd kept, it had details of someone in Derbyshire who makes them. Anyone know who that...

There has been a drone flying over the farmyard (Scotland) yesterday and today, no one has asked permission, can I legally shoot it?

I have recently purchased a joskin siroko 5010/11v rear discharge muck spreader. It's approx 5yo but has done nothing as all the paint was still on the inside. Has anyone had a problem with the front shaft where the idler pulleys for the floor chains run. I bent this shaft last week and replaced...

Has anyone installed a pressure washer that can take hot water from a biomass boiler?

I want to install a bigger hot water tank that will allow me to draw off a large volume of hot water quickly. Water will be heated by biomass boiler, 3000l accumulator tank at 82°C. Thinking 1000l+ tank with coil fed from cold water storage tank via pump. would also need a blending valve in the...

Looking for advice with regards to a concrete mixer, thinking about either 6-9m2 hymix or volumetric type. Mounted on lorry, trailer or static. Which is best? Or any other suggestions?