Anyone tried the cheap eBay ones what accepts the makita batteries, see there’s a 580 nm and a 1000 nm I know they are cheap for a reason but for occasional use will they do what you’d expect
Anyone had problems with the blockage sensors on a pronto, had to replace 2 in the last week while drilling barley never normally a problem ,turned sensitivity right down tried cleaning them , drill is 2013 done about 6000 ha , do they wear out, any help please..
Any one know where to find total drilled area on pronto control box,can find daily total,also why do outer front disks wear quicker than middle this is on a 4 m with no front tyre packer and not over pressurised before any one says.
Got a grimme gt in the workshop and needs some clod rollers,whats best genuine grimme or someone like pan anglia or get them refurbished and if so where to send them
And if so how much please
I have a metal fuel tank that has a small crack in the weld about half inch which is letting diesel drip out ,I know i can weld it by draining fuel but is there any silicone or anything that will stick to it, as a temporary measure until tank is empty
Want to put airline other side of shed but compressor has to stay where it currently is thinking of some sort of pipe round the outside clipped to the wall, any ideas what size as must be able to run a 3/4 gun and supplier . Have read people using blue water pipe but have read it can get hot...
As the title says what other implements are out there which will do simular job also with a better roller as struggling to keep roller turning, any help please
Going to store some round bales again this year inside a chalk floor barn will be stood on the flat side what's best to put underneath (no pallets available. ) as tried a thin layer of straw but seems bottom bales get a bit of mould on them .
What hp do you need for a 3 meter or 4 meter on a mixture of land ranging from sand to heavy clay and are these suitable for pulling up potatoe land prior to bedforming
Got some 26 n to put on spuds, plants are about 6 inches across anyone done this if so when is the best time to apply as worried about scorch, we have dribble bars as use liquid on everything else, any help please.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.