Search results

Fendt 516 on 650/65R38 and 540/65R28. Would 340/85R48 and 320/90R32 work??

Anyone know much about these? Looks like number 2 is the problem, is it a case of replacing it or is there something else I can do? Total weight is about 10-12% out on 1800 kg of Amidas.

Just started using this machine, it has a Tellus Go control box. For some reason when I go into the section control, the sprayer thinks its 3m wide? Some if the settings refer to the Tractor ECU which km a bit puzzled by, can anyone tell me what I'm doing wrong?

As above, not worried if it says 6475 or whatever on it. Its a Tier 3 2012 model. TIA

Anything considered but ideally 650/65R38 and 540/65R28 on solid centres.

Bought a 6480 last year with a 966 loader. I haven't needed to use it much but for some reason sometimes it won't go up and the tilt/crowd and 3rd service is really slow all the time. It seems if I start moving with the tractor the loader will then intermittently rise at full speed but not for...

MAC Lime & Fertiliser are a new family business specialising in soil sampling and analysis as well as supply and application of lime and fibrophos fertiliser. With over 15 years experience of using alternative PK fertiliser, we believe we can provide a cost effective, accurate and timely service...

Bredal K65/85 or Agri-spread AS65/85, must be tidy and ready for work.

As above, already drained the tank and cleaned filter, changed fuel pipe to the pump. As soon as I drive into the crop the engine dies, sometimes below 2000rpm. Blocked it twice on rape as it didn't have the power to push the green stalks through at night[emoji26] Anyone had similar problems?

Anyone know where I can get one of these or know anyone who knows a bit about them? Tried to fire up the dryer and this one seems dead!

Just having a quick look at how the rape is podding up and can't believe the number of slugs on the pods! What damage will they do now, if any?

Any ideas?

Need to move a trailed tedder next week, quote me.

Anyone tell me what this is scattered across a new ley?

One of the actuators that varies the openers has become intermittent to the point we have had to set the rate and drive at a set speed. Anyone managed to fix the problem or is it a case of fitting a new one?

6 cylinder 125hp tractor to move from Pensford near Bristol to Ipswich.

Approx. 950kg of KWS Orwell winter barley seed, manganese treated. Collect from BS39 4DB

Due to forgetting it had already been done, I have a field that been tested twice in 18 months. Once in March 2017 and again a few weeks ago. Unfortunately the samples have not been taken from the same points but the pH is wildly different. The March 17 result is 7.1 whilst the result from a few...

Anyone got anything suitable?

As above, need the auger on the pickup, would consider a whole header at the right money. TIA