Search results

  1. classic cutter

    Radiators

    there's a guy next to morrisons whessoe road darlington used him loads of times very straight to deal with and does a first class job he also recharges aircons'
  2. classic cutter

    Injector pump solenoid.

    sorry for the late reply jcb 525 67
  3. classic cutter

    Injector pump solenoid.

    our did that and it was the starter key switch faulty
  4. classic cutter

    Massey 675 Brakes

    i used to bleed from the brake cylinder with a clean oil can back to the master cylinder if that does not work it may be master cylinder seals does it have trailer brake valve ?
  5. classic cutter

    Bale slicer

    hi we have a bale rotater which fits on loader there is a hydralic moter which allows you to unwind as much of the bale as required regards chris
  6. classic cutter

    Opico dryer - galv getting worn causing grain to stick

    ours always used to ridge at the bottom
  7. classic cutter

    Calf dehorning crate

    i have one available co durham
  8. classic cutter

    MF 595 Mk2

    i am pleased i did not read this 43 years ago our 590 has done over 20.000 hours it had a hard life we had trouble in the early years with radiators shaking to bits and in the hot autumns of those days pulling a 4 furrow reversible plough the backend oil could overheat making it slow to turn...
  9. classic cutter

    massey 8240 8250

    wanted massey 82240/8250 with dynashift distance no problem
  10. classic cutter

    Bale splitter

    hi £1500 regards chris
  11. classic cutter

    Bale splitter

    hi we have a s g m bale unroller as new fit on front loader regards chris
  12. classic cutter

    massey 8250 dynashift

    i am looking for a good massey 8250 dynashift if you know of one available i would be grateful i may consider a 8240
  13. classic cutter

    AGM glass group for cab glass

    i bought a back window for a massey 399 from them 4 years ago no problems with it and half the price of main agent
  14. classic cutter

    Kuhn venta discs

    i was told the Coulter legs were the same as accord drills ?
  15. classic cutter

    Mf 6480

    our 6499 has a fuse right next to the isolator switch under a small plastic cover
  16. classic cutter

    Vive la différence! - MF65 MKI (Mechanical) Restoration

    thats the wedge your looking for between the sump and the back plate mk 1 192 engine
  17. classic cutter

    jcb 525-67 steering

    check that none of the pins have been pushed back on the big plug at the front of cab the sensor should light up i have bought aftermarket ones and they light up there is also ether a sealed box or relays depending on age of machine which controls steering one of ours lost rear steering and rear...
  18. classic cutter

    Classics Earning their keep.

    yes we have been using 865s for 30 years great combines
  19. classic cutter

    Classics Earning their keep.

    the tractor is a 1977 model it originated in new Zealand the cab is a cheap copy of the massey cab made in parmaston new zealand no ac the floor is as used on the open model but good fun to operate
Top