Search results

Sometimes on cold oil I get this code and it puts it in neutral. Later it can work whole day without any problems. Did anyone have this problem and how to solve it ? It says it is some speed sensor fault or something. It is Autopowr. Thanks

What radio will work in JD except original one or Vapormatic JVC for 500€ ? Maybe some JVC will work with buttons and that is it not marked there, 7R plate 15. If yes what model. Thanks

I dont see any discussion on that matter. Can we mount JD G5 or G5+ screen on Gen4 command arm ? If not, can extended G5 monitor be used with G4 machines as they have no brain but just show screen. If yes, anything else needs to be done or just plug and play if same cable ?

This is a longshot but interessted to know if maybe John Deere R with 4600 computer can show it on G5 display ? So when 4600 screen goes bad, will it be possible to put there thinner G5 display ? Also will it be possible to put whole new setup, so G5 brain behind the seat and G5 screen in older...

Hi, owners of these 2 models, how many bars of engine temp you have normally ? Is that 11-12-13 bars ? It comes near red on 13 bars. Thanks

How did JD think that we lock the SF6000 antenna ?? I dont see any part which can be ordered to make this lock work. EDIT: I got it, it goes inside the antenna holder and catches inside plastic hole one the antenna. Admins can delete.

Need some feedback for these tyres, planing to buy 650/85 R38 and 600/70 R30 for JD 8R. They look good, I hope they are aimilar to BKTs. Thanks

Hi, I have a problem where transmission literally blocks the machine when shifting from 3rd to 4th gear. Al other gears go ok. Where to look and what could be the problem ? So you put it in empty trailer mode, drive in 3rd then it blocks like both gears are engaged or something, stops you in...

Hi, anyone maybe has workshop and user manual for those series, year 2012 ? Our dealer did not do many of AgriSuper version he says so I think I could use some manual for eventual repairs. Thanks

First, where is the damn cabin filter ? Then, can transmission be calibrated with JCB tool so it changes gears nicely ? I was almost catapulted from the cabin when I was driving it in "Full trailer" mode. Also had no idea I must stop and then turn the lever to A mode and start driving, I was...

Hi, I have 7R, first models, when I plug the antenna I get that icon on the display but why every R tractor is unable to use its screen as AT screen ?

Hi, I have a problem with T670 MY2013, I can choose corn or soybean on 7" combine display but as soon as I connect 2630 it defaults on wheat. And I cannot change it on 2630 to any of these coz it has only 4 crops from the last display owner I guess. How do I add corn and soybean to GS2630...

Hi, is it possible to buy finally those VGT turbos or just VGT electric motor directly from Borg Warner for better price or still exclusively from JD ?

Are there some conditions thet need to be met so I can lower the damn combine on Hillmaster ? Year 2010, it went by itself so much up that I cannot put my header on the ground. When I try those 2 left-right buttons it just goes up and does not lower any side. Auto button also does not lower it...

Anyone knows if newer 6R - 6155R and 6145R with big screen are AT Ready or not connected with the screen size ?

As with almost every 6030 4 cyl I have a terrible kick on reverser on 6230 Standard. I do gearbox calibration and it is still kicking. Wth is wrong with those softwares on 6030 series ? I have installed latest gearbox payload and same problem. Can someone explain in plain english what do fill...

Hi, I have a problem, when I turn the key it does not show anything on the gear display, it says N on the display on the main speed clock. It does not even start to turn the engine. When I short the starter engine starts, hydraulic works but transmission number is still off and it stays in N...

Are there any differences ? Seller says 557 is non touch and 760 is touch ? Can they both be used as Gen4 Extended monitor for GS4600 in my tractor ? Sounds stupid that 557 was made only to show things and it is not touch ? Thanks

With what belts you have best experiences for combines ? OEM are of course most expensive but what is good alternative and gives most for the price. Optibelt has AgriPower line and all other producers have something.

Does anyone make them ? 350 Euro / piece for original is insane ! I have compared it to 6930 Premium with 750 axle and it is identical but on 6930P it is 22cm long and on 6145R is 26cm long, everything else seems to be the same. Vapormatic and Bepco do not have it as my dealer told me.