Search results

I've a Thermal Arc 175se that's about 4/5 uears old. Fan's running and lights are on but no arc. Any suggestions?

The Grammer air suspension seat in our 8150 is on its last legs. A direct replacement seems to to be in around £700. The tractor is pretty much used for drawing slurry, so not massive hours, but a fair bit of time on the road. So considering a cheaper alternative. Can anyone recommend a good...

I've recently started using hoof blocks, after using Cowslips for years. I'm currently using Bovi-Bond adhesive, which is working well. My supplier also has Hoof-Tite adhesive in stock, which is slightly which is roughly a fiver cheaper per tube. Has anyone any experience of Hoof-Tite adhesive...

Nikon Prostaff 3-9x40, Nikoplex ret, 1" tube, good condition a part from a couple of very minor marks on the ocular bell, but lenses are perfect. Comes with Nikon bikini covers,but I can include Butler Creek flip ups. Pics via email or WhatsApp. £80 posted £100 ,including Butler Creek flip...

MXM 175 is showing a fault code on the side console, F84. Anybody got a quick fix. She's stop somewhere rather inappropriate. :banghead:

We're thinking of changing our hoof trimming crush. We've currently got an old manual Wopa, which is a bit tight for some of our bigger stock. We don't do that many in one go, so I'm thinking of going for a Bateman Hoof Master crush. Has anyone any experience these crushes?

I've seen a lot of people recommend treating calves with Metacam when dehorning them. Just wondering does Metacam have any benefits over something like Ketofen 10%, which is a bit cheaper?

I've just caught on that the front cab mount bushes on our 8150 are knackered.Is it a big job to change them or is it as straight forward as it looks?

I've got a mec - 86 H vac pump on which the small cog in the gearbox has several broken teeth what's the handiest way to remove the cog? Cheers

I need a couple of new hoof knives. I bought a couple of el cheapos off ebay, but one of them has bent already . Any recommendations for good quality knives?

Anyone using or had any experience of the above?

8150 is playing up again.:banghead: I'm getting an intermittent transmission oil level light coming on even though the level is ok, and losing drive. The steering is also feels a bit gritty, and not getting any trailer brakes, and the flow of oil from the trailer brake bleed screw seems to be...

Hawke Panorama 6-18x50 AO, 10x 1/2 mildot illuminated reticle, 1 inch tube, good condition.............. £100 posted

Our welder is on it's last legs, after close to 30 years. I do all the welding around the yard, but know very little about welding sets, so I was wondering what you would recommend as a good general purpose welder? It needs to be portable but capable of being used for the likes of making feed...

Stanadyne Perkins Type 5109 injector pump, originally from a Massey 8110, but fits MF 3600 series as well. Currently on a Massey 3645, in perfect working order. Can be seen running. £900 ono

Just replaced the injector pump on our 3645, but can't get her to run. When you turn the engine over there's some white smoke, but she won't fire. It's a Stanadyne pump. Any tips on bleeding the system or anything else I should be checking?

Trying to take a Stanadyne injector pump off our MF3645. I've taken the front plat off and removed the 22m nut and spring washer. Should the gear now simple pull off with a couple 8mm bolts in the threaded holes?

Can the rear linkage on a Tm190 be lower without the engine running?

Does anyone know what horsepower a 2002 MF 8240 would be? I've tried searching but the results are varied.

There's been one of those annoying oil leaks at the rocker cover on our MF 8150, had a bit of time this afternoon to sort it out. Pulled the cover off, and started cleaning around the gasket, and noticed that 4 out of the 6 rocker arms weren't sitting tight on top of the valves, is this normal...