Must be quite common in Agriculture I should think but has any one found a way of changing name on V5s without adding a new keeper? Ideally need to keep two vehicles as one and two owners to help with selling on further down the line and would really like the vintage tractors bought new on the...
Any one on here built one recently? Have two options to build one here, either off the kitchen to get views, view down drive to main road and mid day sun to sun rise or off the front of the old house to catch morning sun up to around three o clock. One of kitchen will be easier and better and...
Any one on here running a Kia or a Sportage 2015 on? We have one which broke down before Christmas. Lost all drive and a very metal crunching noise. Rocking steering side to side made it drive a bit which pointed me towards drive shaft splines or diff issues. Green flag had to recover it so got...
Have a childrens soft toy here that plays different song lyrics. It recently stopped working so ordered a new speaker for it. Unfortunately it’s still silent!! Had a look at the PCB, it’s got battery voltage, continuity for the speaker wires and every coloured pair is wired to a different switch...
I’ve been a bit shocked to be told by accountant that the RHI payments are declared as an income on a self assessment although we only have a domestic RHI scheme. I’m only unfortunate enough to have to do a self assessment due to having a rental property as I work on a PAYE salary based job and...
Any electricians in the house? ?
Been cleaning some strip lights today and noticed some of the capacitors snow signs of heating up on the connections. Electrical factors are not open intill Thursday so had a look online as some research. The ones on the units are 13μf but a quick google only...
Has anyone used or owned a diesel compression tester like this one?
Ours has decided not to play ball for some reason and will not build up the pressure on the gauge but just fluctuate the needle up and down with the piston stroke. It used to build up the pressure to a maximum level and keep...
Hi, can anyone quote for a Malgar/Primex/Storth 15’ slurry mixer complete 2” shaft and propeller preferably with the 6 splined shaft welded on aswell. Delivered to LL49 area.
Looking for a handbrake cable for a Ford 655, have had an eye watering price off NH one therefore wondering if any one has had similar cables repaires, rebuilt or re manufactured at all? Do cable tec still do one offs or crimp ends onto cable to fit the original outer cable? Any other companies...
Have not seen this on here anywhere...
Who fancies buying a farm with some penguins? Apparently climate is very much like West Wales!! Wet and windy!! Comes with a flock of sheep and herd of cattle, not quite just around the corner though.
https://www.bbc.co.uk/news/uk-wales-46540282
Need to fit logburner into a smallish inglenook that’s been squared off with bricks/blocks. Unfortunately the brickies did the job when it was raining rather than work outside when I was not around. Plan was just to fit a new concrete lintel to support existing cracked one but they squared...
Right then...
Wifi won’t cover the whole house here due to too many solid stone walls!
Have a cat 5 or two access point in each room, all running back to where BT socket and main hub is. Therefore tried using another hub as a repeater, tried a BT home hub, got it working but for some reason it...
Hi there.
We have a Petter PJ3 (I think!!!)engine out of a dumper, been sat for donkey years!!! It’s turning over and injecting fuel. Now, the rack rods were a bit seized when we started with it but we freed everything off. I’ve not ventures as far as re connecting the injector pipes yet as I’m...
Hi.
We have a booster pump supplying the house from a private supply. Recently it had been kicking in more frequently suggesting pressure vessel was not operating correctly. Quick check today confirmed this therefore stripped it down for a looksy to see that the bag inside had split. Not having...
Need a cattle grid by the house, nothing comes up second hand recently, new prices are eyewatering and steel to build one is not exactly good value either!!!! Now then, we have a good amount of scaffolding tubes in the yard. Grid will only be 9 foot at most, only cars etc will cross it.
Am I...
Hi. Anyone come across a backhoe with seized lock clamps on the backhoe? Top clamps release ok, one bottom one moves a fraction but other one will not budge. I find it hard to believe that the cylinder can seize so solid that it won't move at all but again I can't see the pivot pin being so...
Been having a bit of a head scratcher with a skiddy lately, when the safety bar is dropped to release the handbrake etc the charging light comes on!!!! It will charge perfectly when the bar is up but once down to get the machine working the light comes on and it does NOT charge. Have tested this...
Right, here goes....
We had a smallish water wheel on the gable end of a property that we're extending and renovating. It was fed from a smallish pond 30 feet away with roughly 4 feet of drop through a clay 8" pipe. The wheel had collapsed, the pipe cracked from frost and water was appearing...
Vintage Tractors: Massey Ferguson - Te 20
Category: Vintage Tractors Manufacturer: Massey Ferguson Price: £1000 Condition: Used
Description:
Ferguson TE 20, original petrol/TVO. 6 volt system, original CC Caernarfonshire registration including original log book. Very, very original and...
Hi
Looking for a Ford backhoe for a building project. 550, 555, 655 etc. A 655C would be ideal but will struggle to be within budget. Around the £5k, vat not a problem.
North Wales area would be icing on the cake!!!
Looking for a Ford due to experience with them plus a range of buckets...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.