Wheels just fallen off the axles on the sliding door trolleys for the silage clamp. Phoned my mate who builds sheds, cheapest he could do for new king trolleys was £60 each !!! And I need 4 Anyone know of a cheaper supplier ?
I've had a change in the time the milk tanker turns up as one of the farms on the round has gone dry for the next month or so. Tanker used to come after milking so first job of the morning would be to switch on the hot water for the tank wash and by the time the milk was picked up it was up to...
I'm after a square metal pressed number plate for the back of the loadall after one of the cows snapped the plastic one whilst having a scratch, bit of a poor design the way it's held on, so I thought a metal one would be an improvement. Seen a few sellers on eBay, but they want documents...
Having recently bought a new to me road legal quad with number plate and all, and I've just received the V5 back from the dvla with the change of registered owner. I die t notice at the time but it's the tax category of lifeboat haulage. It tax exempt same as ag vehicles, but does anyone know...
Looking to change my 2010 trx500 manual. Hardly any towing, but 4wd a must, and prefer a heavyer bike for these steep hills. No money for new so looking at what's about on the second hand market, preferably honda.
I know to keep away from the electric shift, on the 420 especially. I've seen a...
I've put one sliding door on the new shed for now (price of steel and flat galv sheets are silly atm) so the other two will have to wait.
Normal guide for sliding doors in these parts is a U shaped bracket welded to the bottom of the stanchion and the door slides back and forth. Only problem...
Possibly looking for a cheap skid steer this winter, just to muck out the calf pens in the old shippon. One or two thomas's have come up on the radar that might be suitable.
Now that Beddoes are Wacker neuson what are spares availability like for Thomas ? Is there another UK dealer ?
Chatting with my mum, she was asking where she could go and buy blinds for her conservatory, as she has had enough of everything fading inside.
I had a quick look on the net, and saw that tinting is also available.
The roof of the conservatory is a solid one with faux plastic slates and...
Anyone running an Lwc bucket brush, had mine just on 12 months, and the brush segments are falling to bits, leaving clumps of bristles on the floor everywhere, anyone else having this problem ?
I will give my dealer a ring next week, but just thought I'd ask here first.
Strip grazing the fields here throughout the season, i use a couple of Rutland 9v enegisers, an esb 137 and a very old 127.
I've read to keep away from the button switched Rutland energizers, as they don't last. But as Rutland have been taken over I'm not sure if the new range.
I've come acros...
Hopefully this year, I will be replacing an old hay shed. Living on top of a hill @1200ft it's a windy and have trees planted around the farm yard for shelter.
Unfortunately lots of trees means lots of leaves come autumn, and gutter cleaning is something that gets done quite a few times in the...
I have about 1200 litres of summer diesel in the tank, probably won't get through it till February (depending what the weather will throw at us) so have bought 5 litres of this to add 1.2 litres to my tank
Oh by the way, it's £21 cheaper to buy it through their shop on ebay than buying it...
Daughter managed to lose the only key for the quad the other day.
So as i am this deep into replacing the ignition switch and loom, does anyone know what the valve clearences are for a 2011 trx500 foreman, before I put everything back ?
Thanks
Anyone know where I could get some of these wiring plugs.
Their off a 2001 JCB 520s, they plug into the back of the switches, I've tried Rs components, trawled the net, and tried my local auto sparks. I could just put spade connectors on the end of the loom, but if possible would like to sort...
I have an old komatsu pc60-5 here, dosn't do many hours year, but its a handy machine to have about the place. The track chains are shagged to say the least, with quite a few master pins, and some more with washers welded on the chains to stop the pins falling out ? (previous owners work)
I am...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.