I have a 2010 634-120, and it is bringing up A2 and A7 on the sli. The code is not in the manual. It is locking out the hydraulics. Steering and driving are fine. Any clues? @ACEngineering
We have 2 telehandlers with this joystick. The 2 rollers are plumbed to the opposite service, as in the top roller on one machine operates the boom out function, whereas on the 2nd machine the top roller serves the auxiliary. Is there an easy way to swap one around as I can foresee a time when...
The motor drives the swivel action on an overhedge boom for a vacumn tanker. The motor will free wheel, and not hold position, which is especially annoying when using on a side cast. Would non return valves on each line hold the boom steady or is there a way to alter the motor?
I'm needing a new anvil for my dewalt impact. Tried searching online and all I can find are ones from China that won't post to northern Ireland. Are there any UK companies selling them online that I'm missing?
The hose in the center of the motor tees into the return hose. My question is, does the motor send a constant pressure out this return pipe or is it there as an overload should the main return stop?
Do these buttons on the side of the joystick go to a plug anywhere or is there any way to get power from them to operate 3rd service on a loader? It's a 2013 T7
I have made up some gates and railings to close off the garden for the younguns. Whats the best solution to leave a black finish? Hammerite, 2pack primer and topcoat, or get them powder coated?
Has anyone had a go at making your own concrete pans? We've got a few projects in the pipeline and 4 or 6 pans would be useful. We have hired in the past, but it ties you to getting the job done ASAP rather than a more leisurely pace in between other jobs. Used pans seem to be a fair price...
Are the centres and fitting on the front tyres the same for the 8360, T6080 and T7. 185? The 8360 and 6080 hubs look similar at a glance but I'm not sure about the T7. Thanks
Is there a rotating brush that will work alongside tailpaint successfully? The type with the 2 brushes, working vertical and horizontal, could the top brush be removed to only allow the flank to be cleaned?
Is my MF 135 fit enough for any type of a straw blower? Weight and HP wise. Thinking along the lines of a teagle 4040, to work with round bales of straw. Its the only tractor we have small enough to be nimble around the calf sheds.
Have an area to do outside the farmhouse, the options being stamped concrete, or patio paviers. I know the stamped coloured concrete will have less maintenence long term, but does it look as good as paving slabs. I'd be doing it to resemble paving slabs. It's a new build, and I don't really want...
Usually send my clipper blades to the local hardware shop and they get someone to sharpen them, but that isn't happening currently. Is there any way I can do it myself?
Can you recommend me a USB or AUX dongle, whatevers better, to make my stereo Bluetooth, to stream Spotify onto from my phone. I've usb radios in most machines and I'm not going to swap them out for bluetooth headsets. Thanks
On the milk filter for the parlour, there is a 6"nut tightening against the housing. There is play in the threads now, and sometimes it'll leak milk if care isn't taken when tightening. Is there anything can be done with the thread? Something like plumbers tape, but more permanent.
Recommendations for a battery sprayer to mount in an old farm pickup. Only for zapping Docks here and there when bringing cows out of a paddock. Or has anyone successfully made something up from a barrel, pump and hose?
The bottom door glass on my telehandler has peeled off from the metal. I've tubes of gripfill and CT1 here. Will either of them do the job of holding it on or will I need to get that black mastic type stuff it was originally put on with?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.