Is the warrior Chinese made? Any concerns with them regarding reliability and quality of components etc? Would you be better buying from a big name brand like kemppi, fronius, ewm etc?
Not sure but the ones I've seen have had the front windscreen done too. You can't do car front side windows over a certain darkness as this is where the driver looks out so why would it be legal to do it in a tractor doors etc where the driver is looking out?
Seems to be lots over here in Northern Ireland getting all the windows tinted black that. They are just asking for trouble if you ask me. It's only a matter of time before the police catch on andx start pulling them in and that won't be the only thing they will look at when they are pulled in...
I made my own with a lifting system to lift large rings up to the table at waist height. The lifter also forms part of the table so you can leave it up and stack lots of smaller rings on in one go and then split all these then repeat. Saves the back no end.
I'd say the dealers best isn't very good! I know the dealer over here would not let something like that happen, or certainly didn't used to and I can't imagine things have changed that much.
The best option which is also the hardest to do is to put the eyes on the posts. Then have 1"-1.5" pins top and bottom each end that move up/down on a lever system. Bit of engineering to get it right but it will pay off in the long run with how easy and quick it is to change which end it swings...
No. The handbrake operates on shoes inside the disc/drum. There should be a rubber grommet which you remove and then adjust the star wheel with a screwdriver until the drum binds then slacken off slightly. Adjust both sides the same. The adjustment nut at the lever is just to take up the slack...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.