Search results

  1. Mdt

    Stocks fan jet duo settings

    Hello all, we are looking for settings to spread buckwheat with a stocks fan jet duo. Does anyone have settings that would get us started please? Looked online and no joy sadly. Thanks
  2. Mdt

    Toppers - educate me please !

    We have both batwing and flail, both have their uses. We use the flail for narrow margins etc and the batwing for wider margins and parkland. If go for a batwing be wary of the yellow and blue brand, parts take ages to arrive if needed and overall finding it expensive to run. Would be keen to...
  3. Mdt

    Skippy Scout: Anyone used it or is planning to use it?

    I have just used the skippy scout today for the 1st time. Very impressed so far with the android app and using it. Quite simple once done a field, organise the scout points, connect drone to app then press fly button and away it goes all automated! Very clever. Looking forward to trying another...
  4. Mdt

    Milwaukee

    I have just bought the impact gun mentioned at the beginning, very impressed. I was looking at the 3/4 but was advised to get the 1/2 as same power so nowt to gain.
  5. Mdt

    When a days fencing was nearly his last !

    Not sure for definite but the chap could have been using a rock spike possibly.
  6. Mdt

    Any chance on replacing DeLuxe radio in John Deere 8R ?

    £800 back in 2017
  7. Mdt

    2020 Polaris Ranger Diesel

    We have a Polaris ranger coming any day now, replacing a gator! Didn't even look at a gator demo.
  8. Mdt

    Cat Challenger

    Even though the rowtrac and the smarttrax are identical I was told the rowtrac actually looses power as it has a Dropbox this is how it also has a shorter wheelbase. How true this is am not sure but interesting if so.
  9. Mdt

    Liquid Fert Nozzles

    I use the hypro esi and have no bother at all with them, don't think they will catch your frame at 1m high.
  10. Mdt

    Valtra T234 Direct

    I drive a valtra n174 direct and much prefer it to the other 2 tractors on the estate, a jd 6215 directdrive and a fendt 828. Obviously the valtra won't do some jobs the other 2 will but the valtra is still my first choice. My only niggle with the valtra is the time it takes to change from c-d...
  11. Mdt

    Fendt cargo vs quicke

    Might be wrong but isnt the cargo loaders made by stoll?? We just got a valtra with a factory fitted quicke loader it's a good set up.
  12. Mdt

    N sensor at 36 m tramlines

    Ah sorry misunderstood you, like mentioned you set a min and max limit and leave it to the machine to sort itself out. On osr we just leave it on absolute mode and just leave it to machine to put whatever on in 2 passes. Hopefully will be trying absolute mode on wheat this spring.
  13. Mdt

    N sensor at 36 m tramlines

    As it's a sprayer its calibrated in that way, you can roughly work out how much you need and can always carry it over if any left. We fill up the tanks in the summer when it's cheaper. It's not far out really from just putting it on without the n-sensor but the important thing is that its...
  14. Mdt

    N sensor at 36 m tramlines

    Can see its putting it where its needed and holding it back in the lush/thick areas. You can see it on the display matching with such areas. It doesn't necessarily save on fert it just puts it where it needs to be. Chances are you will also get a comment from combine driver as it feeds better...
  15. Mdt

    N sensor at 36 m tramlines

    The new als 2 scans up to 4.2m wide each side of the machine and this gives an approximate total scan area of 50m2. All been well we are getting the new als 2 for this spring. Am on 30m and it works very well for us.
  16. Mdt

    Jcb locking pins

    We had trouble with the locking bullets on the manitou headstock on our jcb we put it down to grain pusher weakening them.
  17. Mdt

    How about VALTRA T4?

    A bit early to compare to JD, as new engine but I did nearly a days work with a side arm mower and used just over a quarter a tank of diesel, was happy with that as the jd (6630) would have used half a tank easy but haven't looked at figures yet so that's a rough guess. The valtra is definitely...
  18. Mdt

    How about VALTRA T4?

    Sorry I have no idea on price but will say it was a deal that couldn't be ignored, we didn't intend replacing the jd till April. I am just the operator.
  19. Mdt

    How about VALTRA T4?

    We have just got a valtra n174 direct and really impressed with it. Comfy, plenty of power, loving the direct and a few extras with it.
  20. Mdt

    Iseki 321 compact tractor

    Morning folks, my dad has the above compact and it's lately developed a fault with the hydrostat, push the pedal down and it doesn't move like it should be doing, just really slow. Any ideas please where I could start looking would be much appreciated. Thanks.
Top