Search results

Yeah permanent change but can still use the merlo pallet toes to an extent due to the fact the toolcarrier headstock is relatively narrow. I would doubt if a bucket with merlo brackets would work because of the hydraulic locking that was added to suit the jcb brackets

Moneycarrie engineering in Garvagh would be worth a shout. They adapted a merlo headstock to a jcb toolcarrier for us and did a tidy job

Not on our 2016 516 anyway, she's on 380/90 r46. We have a set of 380/90 r 50 on another tractor and tried them on but no good. The back left would just fit but we would class it as too tight, the back right would not fit due to the hydraulic tank

Depends a lot on the make of the tyre, we have 520 continentals and 650 michelins and the difference is next to nothing with the continental being wider than it's supposed to be and the michelin being narrower than it's supposed to be. Saying that I wouldn't recommend continentals for other reasons.

A 30 tonne dryer would be handy if you're using lorries as when it's dried it'll be fairly close to the lorries weight limit if emptied direct. We have a 20 tonne fully automatic electric opico and highly recommend it. You can never have too much drying capacity