Search results

Evening folks I have a terex 970 digger which has a one piece plastic bonnet. There is a metal bracket that should be attached to it for where it hinges but the metal and the plastic have parted company. I was looking for any recommendations of really good glue/ bonding type stuff to stick it...

Evening folks Just looking for advice on how to remove this bush off a bunning. Do you need to unbolt the outside casing or is the easier way? Have tried a few things but cant seem to get the pressure off the shaft to remove the bush.

Alright folks I have a lely storm and was looking for advice on changing the wear plates on the drum. Have done our old mengele but the took the opportunity when the bearings were changed on the flywheel. I remember there are 3 sections but is it possible to the bottom section ? Or is it a case...

Evening folks. I recently bought a second hand terex 970 digger and as the title says it shuts off at 8pm! I'm presuming some anti theft system but does anyone know anything about such a system and more importantly how to shut it off?

considering whether to make gates for a new shed and was wondering if anyone could give me a rough guide to costs for lengths of 2inch box section and inch and a half box. think previous stuff was 3mm thick and came in 24foot lengths? apologies for mixing metric and imperial!

quick question....does anyone know how much the counter weight weighs on MF50ex? think I read somewhere they are full of iron filings? had a search on net but I never managed to find what weight it is

evening folks father has informed me that a bearing has gone on our Watson Cambridge rollers. do you just unbolt both castings at either side and tilt frame up to get access to bearing? also, is the bearing fairly standard and easy to get a replacement from local supplier? any advice much...

I have reached the end of adjustment for the floor chains on my bunnings spreader. was looking for any tips for shortening the chains as there is nothing in the book about it. I am guessing you remove two links? I was going to put the joiner up on top and use a couple of rachet straps to hold...

anytime time someone posts a youtube clip it always comes up with a non valid security certificate and I cant view the clip. the main site wont work either on my laptop. it windows 7 and I cant seem to overrule it? anybody any idea to why this is happening? also I cant get on sites like Hotmail...

Bit random but have a 6150r cvt and was going along the road and I changed settings from km/h to mph and thought it slowed down a fraction. Have a black box cruiser so flicked it on. When set to mph its bang on 50k, when set to km/h does 53k according to black box. Anyone else noticed this?

Hey folks As title say I snapped my tendon about 5weeks ago. Got the plaster cast off last week and have this air boot thing to wear instead now for another 3 weeks, kinda looks like a boot that Robocop would wear! Last few weeks not been bad as I least managde to cut silage and do other odd...

Looking at a new tractor and there is one in dealers yard with 650tyres. They will be great for all the work we do but slightly worried with the KV plough there too wide? We currently plough with 600s and they are fine but do fill the furrow bottom. Is anybody using 650s with KV slats? Do furrow...

Due to buying a lely storm I have a claas 51 forager for sale and also one for spares Year 1999....think it was an import as fairly rare to get models in UK that age wide pick up pick up hitch It was stored inside all its life but has been relegated to being stored outside this last year...

Hey folks thought I would break my posting virginity on here so here goes! currently pricing a new JD 6150r (which im glad I was sitting down when I got shown the price!) and undecided whether to go for direct drive gearbox or not. to be honest auto quad is fine for what we do but my biggest...