Hello, anyone have any clues what this adblue error is? 521026-31.
Did change the filter which was clean but no difference.
The book tells me the adblue is not working, duh, other than that no help.
White smoke from the exhaust briefly when the error showed then normal.
Hi does anyone have any suggestions for an engine compression tester make or kit?
My little 3 cyl JCB 403 smokes like a steam train, not sure if it's rings or valve seals.
I can easily put it in the heater plug hole to test.
Loads on ebay/amazon etc in varying quality and prices, I'm not likely...
Hi has anyone ever fixed one of these before? It has a habit of accumulating dust and when rubbed clean with a rag it turns of everything except the engine. It all usually comes back to life but not lately, the left lcd had died.
Must be quite a bit of static around since it makes the hair on my...
Hi guys is it possible to display error codes on a 310s?
I keep getting the red engine error and losing power with a juddery engine. Turn off and on again and it can be fine. It goes days with nothing and then sometimes a real PITA.
Fuel filter changes make no difference and it nearly always...
Hello has anyone dealt with this chap lately? are they ok.
I want to buy a roller screeder and he seems a very decent genuine type on the phone and the kit is at a sensible price.
They also trade in hydraulic breakers and pto generators.
Comments appreciated.
Ian
Hello, broken a part of the linkage on the 403 joystick. Only a complete new joystick is available from JCB. Anyone know where I can find the rod end with a bolt crimped into it? No idea what it's called either.
Thanks. Ian
Looks like they cannot fulfill their obligations, straw must be a bit expensive.
Administrators appointed at AF Biomass in Norfolk | Eastern Daily Press (edp24.co.uk)
Not gloating about the poor sods who will loose money though.
As a livestock farmer I think burning straw should be banned.
It...
Is there a place I can go to work out the flow of roof water that would be allowed to drain into a ditch?
It all looks overly complicated with many different water types and hazardous wastes, I just want simple rainwater on a roof.
Looks like a red tape nightmare designed to keep "professionals"...
Hi anyone know if these guys reputable?
They have a machine I fancy and don't want to drive down to Oxford on a wild goose chase.
Crawmach Machinery - Crawmach Ltd
Thanks
Ian
Hello has anyone converted a 6m cultivator drill to sabre tine?
I know it wont be as strong as the real thing but they do offer the option. We're not looking to direct drill with it, more maybe light soil lifting and drill.
Mine has three banks of tines so I guess it would need to have 166mm...
Anyone know what pressure these run at? I have 66x43-25 on the back and 48x25-20 on the front on an 8t tractor.
They are the very old Firestone crossply type with 23 degree lug angles split rim wheels.
Firestone have no info on the old stuff, just the new radials.
Hi can you get parts for a JD 6150R turbo or chuck it out and get a new one?
Having errors 517474.04, 520715.05, 641.07(turbo actuator self calibration error), 2795.31 and 1569.31 among others.
Been told to put on a new turbocharger, it's done 4400 hours, 2400 hours since the last one had...
Caught these cheeky House Martins making a nest on our grain store door, not very clever.
Open the door to load, but they remain undeterred and start back over again when it's closed.
Anyone else have daft nesting places?
I was thinking of making my own muckfork for a JCB310. 8 feet wide with a 4 feet high back and probably 10 x 1100 MM tines.
I have 90 x 90 x 5mm mild steel box should that be ok or should it be something higher strength? Should the back be straight or angled in a bit?
Anybody made one?
E
Getting quotes for a building and one quote says it's made with S355J0 grade steel, is this a higher grade steel than "normal"(whatever grade normal is)?
It will all be BS 5502 class 2 anyhow and I guess they would not have put S355J0 unless it was better.
Looking for a CAD service or program for a cattle building design. Trying to explain my mickey mouse drawings on school graph paper or what I want down a phone or email to get a quote is never easy and invariably forget something. Any free easy to use programs out there for a straight forward...
Anyone grow peas and oats for baled silage?
Used to do it years ago and seem to remember it was a good feed so long as it stood up. Clamped back then, round bales now.
There are a few spare acres of wheat that failed to go in here and a gap in next years' forage stock looks probable.
Oats rather...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.