Search results

It's pressure based, it has a very primitive recirculation with very small diameter pipes back to tank. Maybe a set of molegrips on each pipe may do something?

When I had one of these controller's 20 years ago I can vaguely remember you could trick it into upping the rate, but I can't remember how to do it. Will give rds a call tomorrow.

I did wonder this but don't have a gauge on a cap. New sprayer to me, chafer with delta 34i controller just to do fert.

Yes, we're just using water at the moment and will change to 1.25 when go on fert.

We bought some new bfs manual adjusting dribble bars but can't get the correct amount out of them when testing with water. The chart says 2 bar pressure on number 2 hole , and we should get 2.34 litres per minute, but we are only getting 2lpm. Any one had anything similar?

I just keyed in 1.3 and it worked out OK. Number 8 must be when you are spraying concrete?

I still have that sketchy trimble and would like Andy26 system, but as ERH commented, if like me ,you are not as technically confident , it would be the easier option to have it working straight out of the box. As said before, I'm sure there is a living to be made by someone who knows these...

Maybe Andy26 has let the cat out of the bag that these systems can be manufactured and sold with backup such as the agopengps for a fair price.

Had an advert come up on my phone today for fieldbee system for £2600! Do we think the other breeds will follow ?

Anyone know the above number to punch in between 1 and 8? The gravity of the 17% fert is 1.3 to water. Many thanks.

If we don't need rtk accuracy for fert do you still need the base station? Will it run off the free signals? Reason I ask is that there are no base stations in our area as far as I know, and doing contract work within a 40 mile radius of home would mean taking a portable one with me. We spray...

There seems to be a market for someone to fit these kits, both this one and the Chinese versions, for us less techy folk. I would have one of these tomorrow but not confident enough to fit it. Trimble install but the cost of the kit is more than treble.

Sorted now.

Can anyone remember what size wide wheels were on the E series. I am after a set but seems a bit of a mine field regarding offset to allow the steering axle and load capacity. Any help appreciated thanks.

Bought an E.

Now sorted.

I am after a set of wider wheels and tyres for a Chafer E series. 8 stud around 540/ 600 size. Anything considered. Thanks.

Hello Fraser , thanks for the reply but The deal didn't go through so still looking. Are you interested in quoting from anywhere in the country, or from lincs/ Notts only.

Looking for the above to do some liquid fert. Good working order.

Anyone use the above with just 4 sections for liquid fert?I wanted to try some this spring but hear I may struggle to push fert up to the end of the section if only 4 sections on 24metres. Any advice welcome thanks.