Brother is looking at different feed pushers. Lely seems to be the most popular when looking around the different robot farms but are they necessarily the best or is it worth looking at the likes of Joz, Wasserbauer, DeLeval….
Anyone with experience with any of the above (or others I may not...
Apart from @Gerbert has anyone on here direct experience with the R9500 milking robots?
Have a friend thinking of going the robot route and is looking at Gea as well as Lely and DeLaval but there is a bit more information around on the red and blue.
I know the earlier Gea MiOne was a pile of...
Tried using the DairyCo guide to calculating the size of ridge for a shed we are putting up but dont think the figure is right. Anyone care to help?
Building length 72m, width 42.6, pitch 12deg, Eaves are 6.0m and 4.2m (I was able to buy a second hand portal frame and adding a lean to on one...
I am going to put up a new cow building and building for the milking parlour for 200-220 cows but keep going round in circles on how to lay things out, so thought I would see what you guys would advise. Going to go look at some other farms for ideas and have looked back at nearly every cow...
Looking at putting up a cubicle building and wondering is it best to have a gable end or a side of the shed face the prevailing wind. Shed will be roughly 120x220 propped portal with central feed passage and milking parlour and collecting yard/cubicles on one side of the passage.
At the moment I do slurry tanker work and thinking of buying an umbilical set-up if I can get the work. Anyone got any pointers on what to consider when buying, probably looking secondhand if possible to keep the budget down. What makes of pump should I be looking at and what size of pipe?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.