Search results

Any users on here? Good points and bad points? Tia.

Have become aware that these t5's can be got with the autocommand box. Has anyone used one as a loader tractor? Are they good on haulage or does a slight hill kill them?

Anyone ever used this type ? Looks handy as long as the spring stays good.

Currently on hedge cutting tractor have a tyre filled with water but have a chance of wheel weights weighing 450kg. Which is more effective? Tyre is 580 70 38 Tia.

Had a couple of rolls extend in the shed this year both off same pallet. Any reason why?

I've a ezguide 250 I no longer use and open to the possibility of selling it but no idea what it's worth. Any ideas?

Need to remove a tine arm to straighten it but it's stuck fast. Tried heat and a hammer but still won't move. Any other tricks to get it out?

As title which one's are best for regular swapping off and on the tractor ?

This radio in the Massey beeps every 5 or 6 seconds. Pushing the reset button doesn't seem to do anything. Any ideas?

What if any are the differences in these mowers and is one any better than the other?

For a lc302 drill

What way have people mounted toolboxes to the rh steps bearing in mind the need for it to be removed to get at the oil tank

As title really

Going to replace the spring on this ram but can't get the roll pin to shift. Mainly cause there isn't room to get a hammer and punch straight on it. If I cut it out would replacing it with a bolt by ok?

Got a cattle shed with corrugated vented tin side cladding and want to cut some of it open to improve ventilation. I could use a angle grinder but cutting disks wouldn't last any time. Is there anything else that would do it?

Ok so any tractor I've run the mchale fusion baler on has the 110 l/min ccls pump. Had it piped to run load sensing on the tractor. I see tractors advertised with for example 190 l/min pumps. Would that make any difference to the running of the machine?

Seen a tidy 480t advertised but struggling on the Google to find its lift capacity. Anyone know?

In the sub 20k bracket preferably even less is there a particular make/model that won't bite you? Wouldn't have a big workload by any means but reliability would be good. Something like a jcb 526s. Clearly from ad's I've seen I'm looking 20 is yr old machines. Or is it totally pot luck 🤔 😅

I know Teemore and Bateman do them but does anyone else?

Front pto to suit 7618 tia