Search results

Just took my 2004 530-70 bottom door off. There is a grub screw that clamps into a slot on the hinge pin. See photo. 3mm Allen key but a T1.5 torx worked well, pushing through the crud on mine..

Excellent suggestion. I've just ordered a die grinder and a burr. Help with bodging always appreciated!

This is the pdf I was trying to post a link to.

I got lucky. A farmer near Peterborough had a random pallet of assorted slats which I was able to buy. I may be able to spare a few. Which slats do you need? (I've been meaning to get a set reverse engineered - but it's probably not cost effective) I'm currently converting the shares (or...

Hi all, Our 726 turbo Teleporter needs some TLC, and the freelance mechanic who used to attend to its needs has moved on. I've never changed the hydraulic fluid, or cleaned the in-tank filter and do not have any manuals. Where / How should I drain the Hydraulic fluid, and what is the volume...

Hi all, Can anyone point me in the direction of an operator’s manual for my recently acquired Chafer T2000 trailed sprayer? It’s from 1993 but has been really well looked after. I’d like to try to keep it in the same nick. I’m also trying to figure out the most appropriate size of row crop...

The Iskra 3.2kw is now fitted, and the Teleporter starts better than ever. I didn't have any luck sitting on the wheel hub. My 14 stone wouldn't budge it, and I was loth to take the other side wheel off while the machine was tottering on a bottle jack. This is what I did instead. (see picture)...

Easy when you know how! Big thanks! Dafydd.

There isn't much access to the Perkins Turbo engine in a Sanderson 726. Do you get the starter out via the side access hole or drop it down past the axle? Mine seems to clash both ways. Thanks, Dafydd

Am I the only person with a Dowdeswell plough with Frank Slats? I acquired it last year and subsequently found that spare slats are impossible to obtain. A couple are starting to crack near the mounting bolts, and I'd feel better with some spares. I believe that the same slats were used on a...