Anyone have a 6900 before with a fault that when you click the side tab to display the hours it just runs through a sequence of numbers/codes.
Only twice since we have owned the tractor has the hours displayed correctly. I would like to sort it so it reads 100% of the time.
Broken wire...
I'm after the cab suspension compressor in or out of the box? Faulty compressor I'm after
Maybe someone took it out when they fitted springs? Anyone have one lying around?
Has anyone ever used JD weights on a massey?
I've a spare JD large weight carrier and 6 x 50kg slices. Looking to put them on a 64 series massey.
If anyone has done this before let's see how you did it? In my mind I will have to make a 25mm thick adaptor plate to bolt on instead of the...
I'm after some advice on how best to secure a fuel bowser.
I've heard of fob activated pumps but never seen any. We typically use a 'fuel cube/trans cube' type bunded bowser.
Looking for ideas on locks, secure pumps any other ideas.
I am forecasting a tsunami of thefts after April 🙈🤬
As above, a friend currently has a busy yard with a stack of pallets, wooden stillages, crates and timber suitable for firewood.
Free to collect from Runcorn WA7 area.
Thought I would offer on here before calling the local pallet merchants.
We bought this 3050 30k, standard lift non turbo around 20 years ago and it was our main tractor until we bought the 6900 6 or 7 years later.
It needed some work and a few new parts so I will let the photos do the talking...
All,
There is currently a huge shortage of raw plastic coming into the UK and as a knock on the following products are getting hard to get and set to become even worse:
Plastic drainage pipe
Ducting
Perforated drainage
Anything in plastic bags: cement, aggregate
Also the lack of cement...
Anyone on here use or own a branch logger? Im looking for opinions on them over firewood processors. Basically looking for sometging safer than a table saw.
Like the machine in the below link:
Tier 3 massey 6465, oils and filters changed 100 hours ago with all genuine agco items.
Oil filter light has just came on, its on hot and cold, tractor has low hours and brakes arent an issue.
I have replaced sensor "19" shown on the parts diagram. Still no better, any suggestions please?
16 panels in total 4 x 3.5m x 1m x 75mm 6 x 2.6m x 1m x 75mm 6 x 2.3 x 1m x 75mm These retail at over £100 a panel Can be cut down and overlapped at any length All have slight damage to corners or edges from transport straps or loading or slight screwholes can be easily straightened, surplus...
Steel checker plate, looks to be 4.5mm thick Very heavy. Great for a trailer or reinforcing a floor 4 x sheets @ 2200mm x 1260mm x 4.5mm These retail at £170 a sheet brand new.
£80 on all 4 collected
Located in Astley, Manchester
Given a choice of the above or other 2010 to 2014 Massey 150-200hp what would you pick with your own money? All with 4500 to 8000 hrs.
I'm not looking for replies like, go buy a fendt or JD. ?
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.