Search results

  1. B

    Rats in grain store

    Hi Anyone any ideas how to stop rats climbing the diagonals into a grain store. I've put 15" pieces of tin around the diagonals at a perpendicular angle, however they seem to be able to get over these no problem. I don't really want to use sticky pads as this seems quite high maintenance and...
  2. B

    Roller shutter door repair

    Does anyone know who could repair a 20' X 20' roller shutter door in the Malton, North Yorkshire area? Thabks
  3. B

    Loughborough to North Yorkshire PTO mill

    Renn pto mill, 7'6" wide, 7' long, 8' high Loading/unloading at both ends LE12 5PH to YO17 9PL Thanks
  4. B

    Essex to North Yorkshire 5000l tank

    CM15 0LD to YO17 9PL Needs to be shifted by 14th December. 2.2m x 2.7m x 2.2m, forklift at both ends. Ta
  5. B

    Trimble FM750 Yellow Signal

    Hi, Ive just bought a new to me Trimble FM750 and I can't get green signal, only two bars, yellow.. It's a 2014 screen, v7.35 on WAAS (no glonass), its seeing 10 satellites or 13 if set to use uncorrected satellites. Obviously today was very overcast, dunno if that makes much difference. Any...
  6. B

    Dowdeswell Ma140 furrow width

    Hi, does anyone know can a 140ma be turned down to 12" and has anyone used DD boards at that width? Thanks
  7. B

    Proverb

    Has anyone used the above, what did you think? Agronomist is telling me to try instead of Axial for ryegrass control in Wheat.. Thanks
  8. B

    Dowdeswell DP7 letters

    Hi, does anyone know what the different letters assigned to the dp7 mean, particularly the difference between an E and an F? Thanks
  9. B

    Roll or No Roll

    Winter wheat just starting to stand up (gs30), not rolled at backend on heavy clay land that doesn't drought. Would you roll it or not, and if so flat or Cambridge? Thanks
  10. B

    Kuhn 30.1 electric to manual

    Has anyone converted an a 30.1 spreader with electric actuators to hydraulic rams or know what parts I need? Thanks
  11. B

    Sittingbourne, Kent to Malton, North Yorkshire

    6.3m Cambridge rollers, eBay number: 324162783711 Thanks
  12. B

    Danagri 3 roller mill for beans

    Does anyone know what these are like for rolling dried beans? Also do the cattle digest them ok? Only used a hammer mill in the past. Thanks
  13. B

    Mccormick mtx150 error code

    Can anyone tell me what error code CS66 means? The cab suspension isn't working and it's bottomed out. Thanks
  14. B

    Roller Mill pto shaft

    Currently renovating a superior sh15000 mill. The pto shaft missing and I'm not sure how heavy duty one I'd need and whether it'd need a slip clutch or I'd get away with just a shearbolt. Any ideas? Thanks
Top