Search results

  1. Simmy

    Ford 3000 hydraulics/lift issues

    Yes change that
  2. Simmy

    I admit, I have a workshop tool addiction :-)

    Found the cause. Sadly to engage low range speeds. Someone hasn't engaged the lever fully. Stripping the teeth from the brass gear inside the head
  3. Simmy

    Lathe, mills, drills, slotters, shapers and grinders (not angle grinders)

    Found the cause. Sadly to engage low range speeds. Someone hasn't engaged the lever fully. Stripping the teeth from the brass gear inside the head
  4. Simmy

    Ford 3000 hydraulics/lift issues

    Hydraulic filter. Has it got a Hydraulic pump mounted on the ring gear? Left hand side of the engine?
  5. Simmy

    Band saw.

    Price please
  6. Simmy

    Band saw.

    Any pics mate. I've just been buying one the same
  7. Simmy

    Lathe, mills, drills, slotters, shapers and grinders (not angle grinders)

    Haven't got the lathe picked up yet lads. I'll have the job sussed when I get it... thanks
  8. Simmy

    I admit, I have a workshop tool addiction :-)

    WOW.... seen them advertised on his Instagram page. Look really handy, but hell, they're dear
  9. Simmy

    I admit, I have a workshop tool addiction :-)

    Just tool post and 4 jaw chuck. Used to work for a machine shop and have plenty tooling that I've gathered up over the years. Yeah it will run for abouts 5 mins then starts slowing down and locks up..... switch it off then back on, and it will run again for 5 minutes. I'm thinking clutch but...
  10. Simmy

    Lathe, mills, drills, slotters, shapers and grinders (not angle grinders)

    Yeah it will run for abouts 5 mins then starts slowing down and locks up..... switch it off then back on and it will run again for 5 minutes. I'm thinking clutch but might be wrong.... any ideas mate?
  11. Simmy

    Lathe, mills, drills, slotters, shapers and grinders (not angle grinders)

    Recently purchased these. Starrite band saw. Will cut 600mm x 450mm. And the lathe needs looked at slight issue with it. £500 for the saw and £125 for the lathe
  12. Simmy

    I admit, I have a workshop tool addiction :-)

    Recently purchased these. Starrite band saw. Will cut 600mm x 450mm. And the lathe needs looked at slight issue with it. £500 for the saw and £125 for the lathe
  13. Simmy

    I admit, I have a workshop tool addiction :-)

    Whats the price on them?
  14. Simmy

    Hyundai Diesel Generators

    Find an older generator with low hours. Stamford or Leroy somer alternator. Either a perkins or fiat engine... I have a F G Wilson here, the Rolls Royce of generators. Perkins 1000 series engine and Stamford alternator
  15. Simmy

    Hello can anybody help me with parts for a bray loader built on a fordson major possibly a bl430

    I know were there is a full loader and front axle
  16. Simmy

    Scrap Metal Price

    120 a ton for mixed. Broughs at Flimby, Cumbria.
  17. Simmy

    A few workshop jobs.

    Yes found it. And its a 2 phase machine [emoji20]
  18. Simmy

    A few workshop jobs.

    Anyone know about wiring a welder? Needs to pull off all 3 phases as it'll be ran off a generator
  19. Simmy

    quick fixes, bodges and creations

    Just stating the bodge page rules. Saying that, the jobs ducked as its new plate
Top