Concerning wheel centres. I run my MF148 and TS86 on 56 rear wheel centres with an 52 / 60 off set. I notice with the 52 / 60 off set the front wheels have a slight tendancy to pull away from the furrow wall where as with rear wheels eque-distantly spaced the inside of front furrow wheel...
In the coal fired power stations in which I worked thè coal chutes which which handled many thousands of tonnes of raw coal were initially manufactured fŕom mild steel. Because of the blockage problems caused by coal, mud etc.sticking to the mild stèel chutes we had to find a better material ...
Many thanks for your comments gents. My colleague has decided to go for super hydriens believing that they are still very competitive against k25's and don't require the same degree of re-engineering to be competitive, which having used supers and K25 I agree with ! Many thanks
I am assisting a colleague build two "Off the Shelf" plough bodies for use in the "World Style" class. His reasoning is that he is unable to be involved with the amount of engineering and development work he perceives as being necessary to achieve a good standard of ploughing using e.g, the...
I agree with Ley253, I used a KV 2F Match plough behind an Int275 briefly. It pulled the KV reasonably in light soil conditions but in the heavier stuff just wasn't man enough, was OK ploughing at about 5 iniches but then you wouldn't plough at that depth would you ??
Congratulations to Ray Aldererson and Roy Stokes upon winning vintage and classic plough classes in European Vintage Ploughing Championships held at Stackpole, South Pembrokeshire today Saturday 24th September. A really superb job, well done.
I am fairly sure the ploughing rules allow the use of three sighting poles only. Two only may be placed on the plot ie any where between the two headland chips. The third pole may be placed on the headland .
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.