Is it just me or do people find replacing the standard coulter wearing point a sod of a job on these drills.Is there an easy way to access the retaining bolts or do you need a special spanner?
On a previous drill I threw the standard coulters away and fitted something different,but would...
Need approx 8 or 10 Pedestal type 3 phase fans to suit a new flat floor grain store this harvest. will be used for wheat, barley, borage or beans up to 4m deep.
Any views on best performing make , and are the durable plastic versions as good airflow wise as the steel Lishman type...
Is there a brief document to explain options etc for arable CSS?
I need something simple to explain options for a non farming landlord, preferably only a few pages long as the full version is a bit over complex in my view?
Looking at an Amazone ZAV to spread MOP, Polysulphate, ANS etc but also comparing with Bogballe M35 W from KRM. Must be simple to operate and capable of ten years plus life.
Want to hold 4000 litres or more with weighcell and good forgiving spread pattern at 24m or 30m widths.No...
Just wondered if anyone has done this for a new farm building recently, either themselves or has employed a specialist to do so on their behalf?
It looks like a box ticking demand from the local council to me,but build cannot start until approval is granted apparently?
After a few building projects we have accumulated a fair pile of topsoil,which I would ideally like to spread back on the adjacent field after harvest.
Has anyone used a vertical beater muckspreader to do this,or are flying stones a risk too far?
I have thought about using a dump trailer and a...
Does anyone have a recommendation for the above?
We have around ten doors or more that need checking over properly, some in industrial units,others in farm buildings.
Thanks. Andrew
What do people think of fitting a middle front row seat to a 90 Commercial, or should you just put an old sofa in the back instead[joke]
Do those that have one actually make use of it? TIA.
Have a pair of new and unused Trelleborg tyres for the outside wings on a Kverneland TS or EVO type drill. Size is 20X8X10, tread is T539 pattern .They are tubeless 6 ply rated.
Price £100 each plus VAT and postage if required.Would split if anyone wants a single tyre as a spare, just in...
Have a relatively old but serviceable building with a cracked, slightly unlevel concrete floor.
The shed has B1/B8 industrial permission and i would like to tidy up the floor to withstand light industrial use for a good few years.
The floor does not justify digging up and reconcreting, but would...
Our current TS EVO drill is good at most things except heavy trash and DD really.
I would like to have the opportunity to DD when appropriate, with the ability to handle cover crops as well.
What sort of tine machine is suited to heavy ground, drilling rape , borage ,barley wheat, beans and...
Anyone know if it is possible to upgrade the headlights/bulbs on a 13 plate D Max?
Mine are ok on main beam but very poor light on dipped beam to the point of being dangerous.Thanks for any advice.
Looking for the enclosed ball type top link screw in fitting for a Case Puma CVX240 as originally made by CBM, for machinery end of top link. Wish to replace original claw type supplied as standard.
Wanted new 7.5m high, 5m wide roller shutter with hd laths, windlocks, 3 PH drive, brush seals and bottom rubber seal c/w up/down controls and fitting please. West Essex area.
Have been asked this by a friend.My reply was that the Watkins design was as good as any,but what else should be considered?
Looking at 1200kg with toolbox incorporated into the design.
Anyone using either their new RTK Modem based system or a base station signal.
Do you find the accuracy, reliability and backup to a good standard?Looking for something a bit better than Rangepoint ideally.
Need pipe for your bowser/ sprayer set up?
This high flex option last longer and resists splitting far better than Kanaflex hose.
Priced at £150 plus VAT for a 30m reel. As used by many growers on here.
Tel 07850 871173
One Pacer 3" centrifugal mixing pump c/w coupled 415V 3 phase electric drive motor in unused condition.3" BSP ports, full years warranty.
Flow rate 880 Litres per minute, ideal for mixing fertilisers or as a static transfer pump.
RRP is £698 plus VAT, our offer price is £598 plus VAT ...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.