It is a real worry what they will look at next, they have flushed untold billions down the pan with the covid fiasco and are now looking at every possible way to recoup some tax £££s. Under the conservatives we were as farmers to a degree sheltered from some of the wilder revenue raising ideas...
Well a sales rep doesn't need a 4x4 XXL pickup truck. They are the very people who have abused the system which is now being clamped down penalising the genuine self employed farmer or tradesman.
Yes and no! I called out the dealer and they traced it to a canbus error caused by a relay failure, the relay is the once that powers up the engine ECU. The relay was replaced and the machine ran fine for a while then it's started again with the same fault, I can get the fault to go away by...
I don't know the truck Oyke was on about but I've been driving this one recently and I have to tell you that maybe after my 1990s Ford Granada it is the most comfortable long distance cruiser I have ever driven. Not so comfortable is the fuel consumption but then 70p per litre helps!
Round these parts the prices paid for "next door farms" seemingly defy all logic or if not all at least the business school's first lesson about turn over being vanity!
Got a problem with a particular grass field,
Its listed as : Eligible Covers: Permanent Grassland
Land Use : PERMANENT GRASSLAND: 3.4096 ha
I want to use action LIG01 but all the SFI offers for the parcel is Hedge actions?
I've used LIG01 on other fields without a problem.
Any ideas why...
The chip we get is normally less than 20% moisture, but I had a look at the boiler settings and the fuel moisture is set at 25%, could that affect the grate temperature ?
The boiler is a 140kW and the 2nd tilting grate in 10 years has just burnt out. The area burnt is roughly the same so just wondering if this is a common / design problem. The remainder of the grate and the other half are perfect.
They have to be an a straight piece of pipe. Don't know about other makes but the Sontex Superstatic I just got has the required straight section built in, its size DN 40 and the whole thing including the straight section is about 300mm long.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.