Search results

  1. C

    DIY ai kit

    I have a flask available if you’re interested pm me
  2. C

    Robotic milking

    I do have bits and piece’s for a classic vms ,if anyone is looking please pm
  3. C

    Arkaya

    80 degrees
  4. C

    Arkaya

    i have 2x 210 litre water tanks for hot water,it copes fine
  5. C

    Arkaya

    Yes ,it’s working fine,it’s reliable,they’re good at sorting any problems,can always get hold of someone,on the whole very pleased
  6. C

    2nd hand Lely robots

    Second hand robots are quite cheap compared to new ,if I was doing it now then I would buy 3 second hand ones for 120 cows so if there’s any problems then you have lots of capacity,ie 1 goes wrong then you have time to sort it yourself,all brands work , been on robots since 2010 ,there’s plenty...
  7. C

    Is this a eurohead on my loader :)

    That’s the same as mine I think, there’s 2 bits that attach either side on the top to pick up mx attachments,I’ve only used euro stuff, never had a problem,used every day
  8. C

    Robotic milking

    Can you see what flow that it takes it off at,I’ll have a look at mine in a bit
  9. C

    Robotic milking

    Ooops Meant to say check the long milk tubes in the small middle hole,if that’s blocked then this happens,well it does on the old model,could be a vacuum sensor or the settings need changing,I think you can set it to come off at different milk flows
  10. C

    Robotic milking

    Could be low milk flow at the start of milking,what machine is it
  11. C

    Robotic milking

    Could be low milk flow at the start of milking,what machine is it
  12. C

    Easiest hedgecutter to fit and remove

    What make is that?
  13. C

    Arkaya

    Yes it does work,only problems I’ve had is a pressure valve ,had other issues but it turned out to be the parlour end ,problems arise as no one really understands it It does work and arkayahave been reasonable with back up.
  14. C

    Arkaya

    Yeah
  15. C

    Robotic milking

    Is everything ready,building works,drains etc,took a fair bit longer than 3 days for me but it was a long time ago
  16. C

    Kverneland Taarup 4028 Mower conditioner

    If you pm your number I can take pics of my 4024
  17. C

    MF5612 - a couple of things

    No at the top,does it drop on its own when you let the hitch down
  18. C

    MF5612 - a couple of things

    There are grease nipples on the cross shaft,they’re just in a crap place😂
  19. C

    Easyfix matttess

    Neptune I’m prettty sure,just checked their website
  20. C

    Easyfix matttess

    , yep,I’ve got them,been in about 6 years,no complaints
Top