Search results

  1. S

    MTX 150 PTO

    Is it possible the pto speed sensor and the forward speed sensor wires are mixed up?
  2. S

    McCormick MTX135 Stopped working

    70 Amp relay under the dash
  3. S

    Matbro joysticks

    @Agri-lek have you had any success with manitou shuttle lever, or is it only matbro you do?
  4. S

    Manitou shuttle switch?

    okay Thanks @ACEngineering
  5. S

    Manitou shuttle switch?

    Sorry @ACEngineering i thought i tagged you in this post. is there any option only replace or is there a superseded part for this lever?
  6. S

    Manitou shuttle switch?

    How about manitou P/N 257207 ?
  7. S

    Mccormick Cx95 Pto keeps running

    The PTO on the MTX is different from the CX you have to remove the rear PTO housing on the MTX to get at the PTO pack.
  8. S

    Deutz fahr GP2.30 round baler

    Kuhn dealer
  9. S

    New Holland T7 battery isolator location

    Its behind the red cover over the positive lead. You won't see it immediately when you look at the starter.
  10. S

    New Holland T7 battery isolator location

    Its like a big relay down on the starter. They are known to give trouble
  11. S

    NH T7 LED work lights

    I fitted the light brackets off the Tier5 model and i think they are a better job and easier to mount spot lamps on them.
  12. S

    What goes wrong with Fendt vario box ?

    Is there now a software update to clean that Solenoid or something instead of replacing it as often?
  13. S

    Banana for jcb 320

    John Conaty sells them, for around €700 + vat
  14. S

    Mccormick mtx150 no pto

    Well its something gone inside so if the pto isn't turning after that.
  15. S

    Mccormick mtx150 no pto

    Put 12v directly into the solenoid and see what happens
  16. S

    Mccormick mtx150 no pto

    Has the 540/1000 lever slipped into neutral?
  17. S

    McCormick mtx 150 coolant expansion tank

    I was looking for one last year but I couldn't source an alternative anywhere
  18. S

    Tennis Balls In Lower Link Arms Why?

    It wasn't a new machine.
  19. S

    Take care

    Krone are notorious for blades flying off.
  20. S

    McCormick Mtx 140 pto not stopping

    Pto burnt out welded the discs together
Top