Search results

So in your case an hour in the morning servicing up while the dew is on is better than an hour when water is off

An early hour in the morning is worth 2 at night I was always told

Do it before you paint unless your not to bothered about chipping all the paint when it's painted But the oil can leak into your brakes which may mean you then need a front grill and bonnet repairs.... if the worse should happen The seals are easy to do just do them then it's done

Black top grill Black and silver lower grill Mf Red tin work and seat (there is so many makers of mf red that its tricky to suggest who is right anymore I just stick with the hmg brand which I'm happy with Stoneleigh grey chassis Inc starter n dynamo! White sand texture exhaust but really...

No I haven't What info do you need to know

Thank you very much for a prompt payment an excellent to deal with. All the best Regards

Fantastic Thank you very much for the business most appreciated

I can ship to Northern Ireland no problems at all

Many many thanks for the purchase and the excellent review Most appreciated thanks James

You should be on brass olives for the mk1 the flare isn't really going to work either because your union hasn't enough threads to force/compress the joint. Rubber olives are for the later tractors with different steel pipe arrangement You might have to either buy new pipes or remake your...

Yes I too have also, it still performs well enough just needs a little bit more effort to persuade over the tamps

Yes I think there is 1 or 2 left stock is running low on some items I'll send you a private message and confirm my apologies for the late reply

Thank you I've never had any issues abd neither have some customers using then to change terra tyres

Ma Many thanks

David browns get melted down to remake the copy tractors.... so they still serve a purpose Only tractor producer in the UK you tipped scrap in one end of the foundry and drove it out tuther.... They're dam awkward to get right then niggle after that after restoration

8210 series 2 1495hrs wheel came loose with duals fitted and snagged the mudgaurd which damaged the tin panels on the cab....

Yea just used some from logan mcmaster They need shaping as they're straight sections But easier for me to buy them in ready made at the moment The rear corner is yet to finish in the pic

Look almost similar to what leyland used too They won't be the same but possibly worth a look to rule it out

When you cut out your sections spray a weld through primer on the insides After welding you really need a cavity wax applied with a hose up the frame sections Those cabs are pressed steel sections spot welded together Water ingress is going to happen unfortunately You've just got to...

All sorted now thanks I undid the the housing top to release the spring pressure then a few good sharp taps refitted the houseing and all is good