Personally I felt the software control the auto functions of the gearbox was written for vario box and made to work with gears and it doesn't do it very well. See how you go.
Had a 8s.265 vt since mid October, not done masses with it as it won't stop raining but its lot nicer than a Dyna 7 to operate. Only real issue is with AC freezing up, it's had one frost stat but not been warm enough to really test it since fitted.
I use an Ontrac 3 with Incommand on a Bateman. On on egnos so quite drifty when come back to fields each time. Doesn't really answer your question but you'd want to have steer command and rtk I'd say as the Ontrac wouldn't do what you want. Think there is a replacement for Ontrac now which might...
Hi, did you manage to get your issue sorted? I have a Venta 3530 but the issue I'm having is with variable rate control. Changed tractor this autumn from 7700 series Massey to 8s. Worked fine with 77 not so keen on 8s. Using topcon x35 as terminal. Thanks
I couldn't find it in the book either, claas dealer sent this. Hopefully you can see it ok. Think basically one cross auger want to be delivering onto start of main auger flighting, then the second one as the main rotates to face it.
I have got myself one of these cables from ebay and connected up a standard camera to it, I can get a good picture on the data 4 screen but quite frequently it will get stuck between the camera picture and the tractor screen, and end up with a mix of both images on the screen, non of the buttons...
Have discovered that it is possible to transfer boundaries, without the use of the wayline converter, just with usb stick.
Done by importing each field boundary shapefile individually from the usb stick. By drilling down from clients,farms, fields, boundaries then highlight boundary shapefile...
Does seam odd that I'm not getting boundaries into the C3000 if it's something that you've able to do.
Can I ask what format you export information out of the wayline converter to be accepted by the c3000?
What's frustrating is ab lines can be exchanged without any converting direct from...
I've have tried wayline converter this morning, can import X35 lines and boundaries into the tool, but have been unsuccessful converting the boundaries into a format recognised by the c3000.
Also recorded a boundary with c3000 by driving round field, then exporting it into wayline tool to see if...
I did wonder if it was for a reason like you mention, as all other information transferred ok. Given a choice I'd have a x35 but the c3000 was in the tractor when we bought it.
Run both these displays, the tractor equipped with the C3000 was purchased more recently and I have transferred, implements, fields and ab lines to the C3000 but not managed the field boundaries. Im aware the agco screen is not the same league as a X35 so it's maybe not possible?
Both systems...
RB17 doesn't have enough power for slopes or if on a lot of power hungry work like potatoes in the wet, I don't have either so get on fine with my 17.
You can only get the standard contour boom on a 17 rides fine but when dampers and bits get worn will swing around alot. Suspension is hydraulic...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.