Hi, need to fix a worn hole in a casting.
There isn't enough metal to bore it out round and put a bush in, as it will come out the flat on the top.
I've tried building it up with silicon bronze but it is nearly impossible to get in to where it is.
Can anyone think of a good way to fix it...
Hi,
bought a Rozmital rake and it needs a new input shaft on one of the rotors, its about 8 inches long with a 540 spline one end and a 10tooth bevel gear at the other end. I've tried SJH machinery who is the only uk dealer listed on Rozmitals website but they say they no longer supply parts...
Got another bloody problem with this manitou. Its a mlt630 perkins engine with a delphi pump.
I was using it yesterday and it was working great for about 1 hour, then it would tickover fine but put a few revs on and it started to splutter and put white smoke out. Switched it off, left it for...
Hi,
Bought a conor bale wrapper out of a sale. Tried it the other day but it won't stop in the correct place, its picking up how many turns its doing and stops after the final turn, but it ends up about quater of a turn out so you have to reverse it back so it will tip.
From looking on...
We've got a old manitou mlt630 120lsu 4 speed manual, the first time I drove it down the road when under load it sounded ok, but as soon as you let off the throttle going down a hill it growls like mad, honestly sounds like the transmission is going to explode.
I took the 90deg box and...
Hi, got a mate with a manitou 2600 that is only driving the back wheels, is there a lever to put it into 4wd or should it be in 4wd permanently?
Thanks
Anyone know any company's or people that are good at repairing circuit boards?
I've got one off a tyre changing machine that needs repairing as it keeps blowing the fuse everytime its plugged in.
I've tried david king, but with it being 240v i don't think he wants to do it. Also tried loads of...
I ordered a new run of tags off shearwell and got some new combi 3000 tag pliers. I have only tagged 4 calf's with them and had problems with 2 tags not going in. The female part of the tag is not supported enough in the pliers which is allowing it to be squashed into the pliers so the male part...
Hi, got a massey 6180 dynashift that has a problem with the trailer brakes.
When you press the brakes the trailer brakes dont come on gradually, its sort of all or nothing.
Put a gauge on to the trailer brakes and pushed the pedals down slowly and it jumps from 0 bar to 50bar to 120bar.
I...
Hi,
I had to shoot a neighbours cow the other day as it had gone down and the knacker man who came for it didnt have a gun with him.
Does anyone know what the laws are on shooting someone else's livestock? Is it legal, or is it a case of JFDI
Thanks
Hi, have a 7700 that has always started, ran and stopped perfect. However after leaving it about 6 weeks it wouldnt start this morning.
No diesel was getting to the injectors, as if the stop was pulled. We have took the side off the pump and the rack isnt siezed it feels like its the parts...
Hi,
We are having problems with our MLT630.
A couple of weeks ago the hydaulics and steering went off. Switched the machine off and back on again, and everything started working again.
It is now doing this 95% of the time, it goes forward and back fine but the steering goes rock hard and it...
Hi
We've got a 5140 that i've been bringing bales home with for the past couple of weeks and its got a few problems.
When the engine revs are below about 1200-1300, the steering goes extremely hard, to the point it doesnt turn. Which makes it hard to pull in a tight gateway with it, as you...
Hi
We've got a NH br7060 baler and the bale command plus is wired into one of the tractors.
We also have a moniter and harness of the last NH baler, the moniter is slightly older version, square corners on it, but is a bale command plus.
Just wondering if the moniter off the old baler would...
Hi
Having a problem with our 5140, put it on the grass cutter this morning to go cutting and the lift arms wont stay still.
We have put it at the height it needs to be at and within 1 minute they have dropped down to the floor.
It just keeps doing this everytime you lift it back up.
However if...
Hi,
Need to rebuild a pick up hitch on a 1056 as all the bushes and pins are worn out.
Does anyone know what grade of steel should be used for the pins and the bushes?
Thanks
Hi
Got a 5140 maxxum that we wanted to use on the baler this year, however it has some problems
The first is the brakes, if you bleed them they will last about 2 days and then they will need bleeding again, i have been told it could be the seals in the back end. Anyone had similar problems?
I...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.