So I bought a 2005 torro 5700, it had a new knife bank fitted but on third cut the rotor has sheared in two.
Gearbox seems fine as do the end shafts, does anybody break wagons and have good used rotors?
I'm in NI so rotospiral is an option for repairing/refurbing...waiting to hear a rough cost...
What kinda flow rate gallons/hr would you get with a Garda pump and say 600m pipe through a 7.5m dribble bar?
Iv a 3000gallon tanker so would need Garda pump on a 3500 gallon tanker or get a Garda pump off something and mount onto a sealed skip or container. That would let me build up a...
Does anyone know if a top fill slurry tanker could be used as a nurse tank and the splash plate be changed to fit umbilical pipe to, to pump to a field?
Thinking of a system that would be used in early season/wet weather/cereals that would be low cost.
Not needing to pump big distances or up...
Hi,
Just wondering if I sowed vetches early autumn (aug/sept) and mowed and baled/clamped (April).
If I direct drilled pea and barley mix would the mowed off vetches regrow?
Same question for autumn sown triticale. Mowed (after stem extension but before flag leaf) and baled/clamped, pea mix...
Couple of unknowns to work out.
-What size of settlement tanks would be best/how long do you want slurry to be in that tank?
-Any low cost ways of separating the sand dug out of these tanks compared to sand still in suspension?
Will a robotic scraper last?Lely have a discovery machine coming...
So, this system may work...
-Robotic scraper scraping passages every couple of hours into a slurry channel.
-Slurry channel flushed with separated slurry into a reception tank with ramp for forklift access.
-Second tank beside first with Weir between the two, also sloped floor.
-Slurry that is...
@Fergieman looking at the pic of the tank you have posted. have u poured walls within the tank to replace piers and lintels? if you have done this why? and how do you mix the tank?
yeah meant to say will be four row of cubicles with feed passage on one side and along the gables to provide enough space for all cows to feed at once. open fronted single cubicle will run along feed passage to close it off and then non return gates.
To tank the whole shed would give me over two...
Hi, have been trying to plan a greenfield 2 robot shed. Many options have been drawn. Thinking of delaval robots with milk first setup. Siting robots in the middle of the shed with cubicles at either end to run as 2 groups fresh and stale.
The question is do i put a central tank under the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.