Has anyone experience of Maxam tyres? Considering a set for our combine but not heard of them till now. Combine is 15 years old, looking to keep for another 5 seasons.
Anybody thinking of cutting forage maize next week? Been looking at ours and much as the calendar says it shouldn’t be fit, it looks like it needs to come off soon.
After locking the steering solid whilst on the road yesterday thought I should investigate. Bottom bearing race completely worn away, been told parts not available, local bearing suppliers can’t help so after just 5 seasons looks like it’s destined for the scrap bin. Feeling a little...
We are a family run farm/contracting business looking for an experienced tractor driver for summer 2019 from late april/early may through to end September/ early October.
Jobs to include silage making( principal job raking), hay making, round baling straw, maize trailers and some cultivation...
Front Press & Trailed Press: Micheal Moore -
Category: Front Press & Trailed Press Manufacturer: Micheal Moore Price: £2950 Condition: Used
Description:
Michael Moore 4m folding double press with 2 rows leading tines. Good overall condition.
£2950 plus vat
07971 491703
Images:
See...
Got a customer asking about applying Baletite film to round bale straw, 1.65 metre diameter bales. We have a Mchale v660, yr 2016 and Newholland roll belt 180, yr 2014. Does anyone know if it’s possible to use the film with either of these machines, if so what modifications are required and how...
Sorry in advance for creating another pickup thread. Likely to have an Isuzu d max company vehicle and would like leather and heated seats which come standard on Utah spec, but comes in slightly over the available budget. Does anyone know if it’s possible to upgrade a lower spec vehicle to have...
Front Press & Trailed Press: Cousin - Front press
Category: Front Press & Trailed Press Manufacturer: Cousin Price: £3500 Condition: Used
Description:
Cousins front press, 4m hydraulic folding, 2 rows of spring tines, in good working order. £3500 + vat. 07971 491703
Images:
See the full...
Rollers: Vaderstad - rollex 620
Category: Rollers Manufacturer: Vaderstad Price: £2000 Condition: Used
Description:
Vaderstad rollex 620 rollers, breaker rings in good condition, paint is a bit faded. Now surplus to requirement. £2000 plus vat. 07971 491703
Images:
See the full size...
Have an new to us drill with the basic accord control box fitted. With the box powered up it will advance to the next bout using the button, but as soon as the drill is plugged in to it then it won’t. It does however advance on automatically with the markers just as it should. I’ve tried another...
Looking for a second hand front pto to fit NH T7030, yr 2010. Tractor has factory fitted linkage only and would like to add pto to it if anyone has a unit they don’t need.
Thanks
Vernon
Drills: Horsch - Co4
Category: Drills Manufacturer: Horsch Price: £6950 Condition: Used
Description:
Horsch co4
1999, accord metering and tramline control box. Cleated tyres, duett coulters, pto fan, in good working order.
£6950 plus vat
Images:
See the full size images for this...
Have a small acreage of beans to drill for a customer, not enough to justify a set of bean coulters. Does anyone manage to plant beans with duett coulters on a Horsch co successfully?
Vernon
Having a bit of bother with our McConnell PA65t hedger. Keeps blowing the supply pipe to the control valve block from the pump, currently one every two days. Have had a pressure guage tee'd in and the relief valve is operating as it should and blowing at the correct pressure if any service is...
Have a couple small problems to look at with one of our TX combines this week.
First one is the header creeps down very slowly, maybe an inch in a couple minutes, then when the hydraulics cycle to keep pressure up it lifts to where it previously was.
Second one is the drum engages as it...
Been out today first time with new to us co4 drill. Checked everything this morning and all was working correctly in the yard. Started drilling and only one marker would go out. Would not change over to put the other one out. Consulted the book which suggested replacing the change over valve so...
Have a new to us Horsch co4 that we're just putting through the workshop. Have three wheels with slow punctures and they're tubeless. Does anyone fill them with liquid sealant and if so how successful is it? I expected them to be tubed as our vaderstad is. Thanks
Vernon
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.