Looking for small tractor to do some topping etc on smallholding.
Found Iseki TG 6400 2015 447 hours for £18k or David Brown 996 1980 4000 hours (in excellent condition)£12k
Which would you go for?
Started my tractor driving days on DB but have no experience with modern compacts.
Looking for small tractor to do some work on smallholding, topping etc.
Seen a second hand Iseki for £18k
Other option is immaculate 40 yr old David Brown 996 at £12k
Advice please.
All bloods, forage analysis shows desperately low cobalt and low iodine (selenium and copper ok) what would be the preferred strategy re drenching /bolusing or injecting for breeding ewes and growing/fattening lambs.
No apparent problems with ewes, fertility and fecundity good but lambs stall at...
Just bought s/h 3 meter Claydon drill with what I think you would describe as wide press wheels ( look like car tyres with little or no pressure in ) soil building up on wheels u til they dont turn a d bulldoze soil. As they are set up the gap between wheel and scraper is approx 1 1/2 inches...
Need to order tags for breeding ewe lambs. Have been using Shearwell set tags which are ok, have used Roxan tag faster as I like the matching coloured tip on the yellow tag so that you can tell how old they are if they loose the secondary but dont get on with their auto tagger. As I'm getting...
Scanned a shed load of triplets, outside lambing so usually take one off and artificially rear.
Had Lactec machine for a number of years but not found it to be very reliable, powder bridges across probe and stops it filling, gets worse as consumption increases.
What brand of machine does...
I was using my very old JCB 814s yesterday and all was well. Slew was working fine, did some tracking in of hardcore for about 30 mins not using slew and then when I went to use it again it wouldn't work. Hydraulics are pressurising when asked but no movement.
Thinking it may be electrical as...
Just about to start to bale tonight with 6820, got out of cab to put gauge wheels on baler pickup, lights went out, fan stopped, hazards dont work (but indicators do) four wheel drive not working and shuttle not working. Starts ok.
Never done it before any ideas gratefully received as there is...
One of the discs is seized on our Accord spinner. Haven't taken one apart before. I am presuming you have to take off agitator and drive shaft and then remove gearbox mounting studs and the whole thing will drop out.
Grateful for any advice and suggestions of what may be wrong.
Having trouble with the net actuator on JD 678 wrapper baler (same as 578 baler)
Get warning when starting to tie "net actuator broken, see dealer".
If I press the button to manually start wrapping it usually works but gets worse as day goes on.
New part expensive.
Anyone taken one of these...
I think I saw on here someone mention a water tank with a flap to stop straw from blower getting in, can't remember make, can a yo e help a d are they any good.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.