Hi . I have spent the last two days trying to drill some beans with a Horsch prunto. Beans keep blocking metering wheel. Have fitted a plate for large seeds.any ideas or tricks to help
Hi.i have a 2004 new Holland Tm 155 power command.it has lost all the gears, PTO and hydraulics.the steering and spool valves are ok. There is a burnt smell coming from console by the controls .
Hi, we have a new Holland TM 155 2006 ,6500 hours. All of a sudden it has started blowing a lot of black smoke when under load and oil is coming out of filter in top of rocker cover.not sure if two things are related but started about same time. Any ideas greatly appreciated
Hi, we have a new Holland TM 155 2006 ,6500 hours. All of a sudden it has started blowing a lot of black smoke when under load and oil is coming out of filter in top of rocker cover.not sure if two things are related but started about same time. Any ideas greatly appreciated
Hi.my 2006 new Holland TM 155 is hard to start when warm. Have changed starter and battery but still very sluggish and sometimes won't turn over. Is always fine when cold and engine pours out black smoke when under load .any ideas thanks
Hi. I have a ford 4000 with a knackered engine ,I have a good 6 cylinder engine from a ford cargo lorry.Would it be possible to put engine in tractor .thanks
Hi we have a 4 year old fendt 939 done about 2500 hours and has started to use a engine oil , at the moment it using about 2 litres a day so not good. Has anyone got any experience of engine problems with fendt and what help were fendt
We have got a bunch of lambs to finish indoors what do you think about shearing them, Wool not really worth anything but will they finish quicker, Always think about doing it but never do,
Hi i have just changed the clutch slave cylinder on a new holland 8060 combine, and cant get it to bleed. have undone bleed screw and pumped pedal till only fluid comes out, then tightened up bleed screw but still nothing on the pedal
Hi, we purchased a new joker 8 rt in 2015,it a good machine but this year both ram ends snapped off and we were unable to unscrew the threaded piece of end.dealer tried heating it up but no good.it seems like they have used alot of thread lock .we have had to buy two new rams at the cost of 3000...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.