Sentinel A60 air and a clear mask for grinding which attacehes to the same air filter and blower unit. Nor cheap but nor are lungs! I think I use the clear mask more than the welding in terms of minutes worn.
Sadly not. Waiting for Trimble to hopefully send an updated profile to se if that works. Vantage asked me if I want to renew my RTK subscription but suggested they get the systems working before I pay again!
What happens if you clean some crops thus moving the crop into a different store - in theory all the crops on the farm could come from one store! Farce.
Nearly a month has gone by since my first post (not the start of the problem but my first post) and GPS is still not working. New Holland's own engineer coming tomorrow. I was led to belive that the 315 would have some better backup and so far I am feeling very let down. Local dealer is doing...
Not quite. FMX doing steering and VRA and scetion control on vaderstad control station. One RTK GPS doing both jobs. Tractor hopefully coming back today ready to go (its raining) and told ISOBUS in new cabs needs some work! Come on CNH - great new cab but we would like some reliability aswell.
The saga continues. New valve installed and tractor came back and went drilling for five days without issue. Swapped back to cultivator and problem reappeared. Swapped back to drill this morning and now the tractor seems to have forgoten it has ISOBUS and wont "see" FMX so no steering. You could...
Tractor is now in the dealer's workshop having the valve on the orbital fitted. If not then orbital. None in UK stock yesterday afternoon but delivered from Austria to dealer by 09:00 today. We will see.
We are having issues with our T7.315. New last year and FMX installed by dealer and GPS supplier (well known national firm) at local tractor dealership. It is on RTK with a local Trimble base station. We run three FMX units in CNH tractors and the other two are working fine. Last autumn and...
We have a dewalt gun and really like it. I think it has only airlocked once since we had it - 2 years - and that was more likely we incorrectly installed the cartridge.
Sadly not called Paul Tory-Fowler-Fortescue but I think his dress sense is sometimes questionable!!
He is very efficient and is paid, on your behalf, by Network Rail so fees in this case are irrelevent.
Paul Tory - Fowler Fortescue near Salisbury. Did one for us last year and it went smoothly with over runs and remedial work priced in at the start. They will over run and leave the site in a condition that invariably needs remedial work. They will also pay for your agents fees.
Sorry but dont think I can help on this. Our issue was the FMX can only run one "boom" and a ZA TS has two "booms" - each spreading disc - so had to go for an Amatron 4 with the fmx exporting a position signal to it. Isobus on tractor screen for spinner, Amatron 4 doing VRA and section control...
We have hopefully resolved it today but needed an Amatron 4 to make it work. Isobus from the spinner into the tractor and spinner main screen running on the tractor screen with the FMX exporting an NMEA signal to the Amatron 4 which runs section control and VRA via an Isobus connection into the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.