Search results

We are having issues with our T7.315. New last year and FMX installed by dealer and GPS supplier (well known national firm) at local tractor dealership. It is on RTK with a local Trimble base station. We run three FMX units in CNH tractors and the other two are working fine. Last autumn and...

We are trying to combine the above! We have connected it all up with dealer support from all the relevent dealers including required unlocks. The FMX controls section control and variable rate via an isobus connection in the cab to the Intelliview 4. The Intelliview 4 controls the spinner via...

Does anyone have any tips for a new worshop air main? We are looking to move the compressor out of earshot and need to pipe the air to where it is needed. Is Sharkbite air worth the money? Tips please!

Any tips for picking up flat linseed? Class 770 and vario header. First time cutting linseed and not looking forward to it!

We normally use a Trimble FMX with RTK for drilling with vra seed maps. To allow for overlaps we use the prescription factor setting to reduce the rate slightly. Due to a problem with the drilling tractor (whilst being serviced at the dealers) we have been lent a Case Optum with an AFS Pro 700...

Does anyone have a good idea where to place the above joystick in a new Holland cab. Sidewinder and intelliview Iv please.

Will the Teejet Aeros record "as applied" spray maps and will these files be able to be read by Farmworks? One person says yes and one says no. Is anyone actually doing it and does it work please?

We have a 2012 Case Magnum and the wheel paint is peeling. I would like to repaint the rims and wondered what colour the rims are. I have spoken to my dealer who can supply Case Silver paint but have found paint from the dealers to be poorer quality and would rather a car refinish paint as it is...

What would be a fair rate to house, feed hay and haylage but no concentrate and provide bedding. I would check them daily. We are pricing putting up a new shed and handling system.

We seem to have them fail at 1300 hours, on our second replacement. Anyone else have the same problem?

Following on from a thread in the Centurion Max in Linseed, has anyone done, or doing, an EAMU for Centurion max in Spring beans for Blackgrass. It would be a useful active to have to target the damn weed in a break crop where there are very few actives that work. Looking at an American label...

Where is the best place to get personal indemnity insurance for agronomists please?

Where do you get it from. I am doing my basis project and realised it all hinges on being able to get my hands on some paper!

Does anyone else have problems with cutting beans with bindweed growing in them. We sprayed roundup on them two weeks ago and it has had little effect. Bindweed still green and rotary separator on lexion 550 blocks up really quickly. Is a rotary combine any better of any brand. Surely I am not...

We have the above spinner and when we hitch on and try to use it the screen freezes and we have to disconnect the power to clear. We seem to do this four or five times and it then works normally. Have tried cleaning cables and plugs but to no avail. We recently had a new weigh cell circuit board...

Is there a video out on the Trimble fmx. Wondering if I could use the Intelliview 4 as the viewing screen and the fmx as a camera setting. We would then be able to mount the fmx out of the way in the cab but still be able to see lines on Intelliview.

Has anyone else had problems with overwintered Clomazone. We used Clayton Chrome last year and it blocked the sprayer with fine gritty paticles of sludge. Picked up some Fiddle yesterday and the same issue, apparently overwintered in suppliers store again. Supplier is sorting it out but a pain...

I am looking at getting farm works mapping to create vra plans for seed, sprays and fertilizer. Is anyone using this program and how easy is it to use. Would be looking at importing courtyard soil zones in to the program and using these to define the vra maps. Does the iPhone app connect to the...

I am looking at options for my first gps purchase. We have had some fields tested by Courtyard and have found some variability. I am now looking at buying the GPS system to give a signal to my sprayer and spinner. I have narrowed it down to the Trimble FMX or the NH Intelliview iv fitted into a...

Can I connect a Trimble FMX to a Hardi 5500 with just a serial cable and get section control? Looking at getting an FMX and wondered if the above is possible.