Search results

  1. G

    MX front loader hitch

    Looks like faucheaux brackets to me , not seen one for a long time some measurements would be helpful
  2. G

    Reekie 5254 S Destoner problem

    My bet would be the slip clutch, only give it 1 pump of grease per season, if it’s been greased strip it down and wash out with brake cleaner, for a new one or repair kit ring Steve Thorley or Andrew Scott
  3. G

    Contractor charges

    I meant the driver’s hours that can’t be charged for washing windows ,filling with fuel ,hitching up machine's.
  4. G

    Contractor charges

    Tractor £15 Tyres £1.50 Service/ repairs £4 Insurance £1.50 Driver £15 Total £37 Plus profit @ 20% to cover washing maintenance etc = £44.40 plus fuel and adblue
  5. G

    Trimble GfX750 ez pilot pro available

    Is this still available?
  6. G

    Big square baler ejector

    I always carry half a bale of straw in the chamber then first bale of the day is well formed and the correct length then rebale at the end of the day
  7. G

    Total N on winter oats

    100 units 4 splits
  8. G

    The effects of the virus on machinery dealers.

    Maximum benefit, minimum cost
  9. G

    S Cheers Agri Engineering Ltd

    Yeah good as gold , brought a tractor from them last year [emoji108]
  10. G

    4m folding combi drill /w rear tank

    As far as I know it’s lemkin, lemkin or lemkin. Try Andy Guest he might make one ?‍♂️
  11. G

    Grimme Variant/GZ.

    Go to a GT 170 m there’s plenty around, you will regret buying a GZ after owning a Variant we did , if main web is slipping check the web tensioner the pivot pins will rust solid so even with full tension on the springs it won’t tension the web, hope this helps
  12. G

    Best place to get Rolland blue/green paint

    got mine from here very helpful
  13. G

    auger flights

    JMT Enginering Ladbrook
  14. G

    7530 engine rebuild and improvements :-)

    Because he’s asking the dealer for advice and buying non genuine parts
  15. G

    Price for umbilical spreading

    We charge £95 per hour pumping £45 per hour reeling
  16. G

    CLAAS 610c

    Should be a good tractor with those hours on , we’ve got 6 now and 3 of them are over 7000 hours
  17. G

    CLAAS 610c

    How many hours has it done? Think it’s a good simple tractor. Has the head gasket been changed?
  18. G

    Claas arion 630

    Get accumulators tested we’ve lowered the pressure in ours , 630 axle is not as smooth as the 650s , diaphragms are prone to blowing
  19. G

    Claas cmatic vario

    Got a 650 cmatic 15 reg done 7000 hours gear box has been trouble free
  20. G

    Staffing Attitude

    Always cut string out in customers yard then they can’t complain about time charged , best money you will make charge at full rate ,tractor stopped only cost is penknife
Top