Search results

Hi guys. I am trying (so far in vain!) to locate a driveshaft yoke for the primary driveshaft, that runs through the grain tank on a jd 9780 or cts. Part number H158816. or a complete shaft AH151618. It is a Dana spicer driveshaft, with sticker number 090DS45002-5406 on the shaft (also casting...

Any suggestions for a supplier, anywhere in Europe preferably, for major combine parts. Primary countershaft, primary gearbox parts etc. Not really looking for used parts but would consider aftermarket. Thanks in advance....

Hi guys, I am looking at a 2000 John Deere with a 25 foot header (says model 925 on plate). I have some very small tight fields to cut for neighbours and even though I am assured by cts owners that the auto contour makes the width extremely workable, I would like to know if there is a smaller...

Hi Guys. I have a trimble xcn 2050 (new holand flavour) using latest firmware and piq app. Can anybody tell me if it is possible to delete the coverage (screen painting) only? I know I can delete the task, but that seems to delete the guidance patterns too which I dont want to do. I want to...

Hi Guys. 3rd merlo issue! (oh for a workshop manual😭) I had a shuddering when retracting the boom for a few days (mainly when machine cold). Not big issue but annoying. Now the shuddering has pretty well stopped, but I have slow boom creep inwards when I let go of the button wheel on top of...

Hi, I have a recently purchased 2009 7k hours Merlo as above from main dealer here in Ireland. (Sold a very old JD4400 with high hours). Deal was done on basis of operators manual, parts book and workshop manual to be supplied. Got first two but am told there is no ws manual for merlo digital or...

Hi guys, I have a xcn (new holland flavour) tmx 2050 running Rangepoint rtx. I have updated the firmware but am having random non convergence events this year. Usually takes full 5- 10 mins on startup to converge..Generally once going it is fine. But sometimes drops out and again wont converge...

Hi guys, do any of you have any links to current ( as in up to date!) basic instruction/video for the current version of my xcn 2050 (new holland flavour) running piq app please? The only video I can find is on Trimble website (a complete mystery in itself!) and it shows setup page but not the...

Hi Guys, I fitted led lights on my front mounted liquid fert tank, (easy to fit as load on wiring is so low I could just tap into headlight circuit on my case). Having completed a season drilling in varied conditions I have decided that I hate leds! I find the cold white colour temp is hard on...

Have been trying in vain to update my xcn2050 from v 3.5.1.3 to the latest v6.20.001.30.4 but it will not recognise the upgrade file. (usb is working for backup and I tried both the unzipped and the zipped version but the system does not see the file) I spotted a video on an american website...

Any guys know where I would get a trimble ez pilot steering adapter plate for a 2003 case 140 mxm? It is approx 17mm spline - seens to be a lot smaller than the Tm one. Pm if prefer. Thanks

Am purchasing a used Cnh trimble autosteer system (2050 plus autopilot steering) but we are having trouble transferring ownership. Since the unlocks are linked to the 2050 We presumed that we could transfer ownership from the original owner to myself easily.......but the website has defeated us...

Hi guys. Am about to purchase a gps system. Apologies if this has been asked before (I cant find it!) but does anybody know can you get a trimble 750 or 2050 to display which lines are the tramline passes? (just to clarify a 3 m drill so system puts up guidelines for the field @ 3m. I want...

Hi guys. I Have an old but well minded bogballe exw. With the blue callibrator box. Went away washed and oiled last autumn and now has a strange issue. The weigh cell is working properly weighing right, counting down and correct when empty. The speed sensor (pulse on tractor wheel) is reading...

I have a 1992 jd 4400 with front axle brakes gone. Presume plates worn out and it has popped the seal as I had high pressure in the hubs. (At the moment they are disconnected and pipes blanked) Looking at a workshop manual it doesnt seem to be beyond my capabilities to rebuild the brakes. Any...

Hi guys, Anybody any experience with running grain through a combine in the yard to clean for seed? I vaguely remember my grandad doing it with a very old massey but not much else. I have a deutz 3580 which has a door over the walkers and was thinking of simply running it in there with an...

Hi guys, Looking for any advice on Horsch CO problem please. Accord seed unit with Agtron drill manager v17. No trouble last year but this year when I went to callibrate I noticed that the motor was sluggish and I could not get a bean calibration @200kg/ha (620tgw) to a speed of more than 4 k...

Hi guys. I am in the process of fitting a liq fert applicator to my horsch drill. (gen low disturbance points direct drill or min till) I am on ph 6ish soil which would have had a lot of lime over the last few years. I am currently looking at the liquid fert options available. For this year...

Hi guys. Anybody know where I would get a replacement Hardi Tank lid. It is for the old type half turn seal (not the screw thread) on a 400 litre. I am told that they are no longer available. Or has anybody fitted a new lid and thread (like the arag ones?) If so which one and did you have to cut...

Thinking of fitting liquid fert to a co3. Thinking old sprayer tank on front linkage with electric pump to simple manifold(s) piped to legs (my gen openers already have LF pipes). What Im wondering is what Type and amount of fert are you guys using so i can work out pump size for my 3 m drill...