Search results

Does anyone know the part number for the Monroe cab springs that fit where the shockers are on a 6480. I know people have fitted them on here instead of the mf supplied ones at a fraction of the cost, and mf probably get them from one of these firms in the first place. Cheers

Is anyone spreading diamond 33.5 n 30 s with a Amazon zav on v set 2 discs on 21 metre? The app settings seem to be way out, I am going to get someone from Amazone to come out seeing as we are not miles away from there base but just curious if anyone has any settings of there own.

We are having an intermittent issue with our cx tank full indicator, sometimes it works fine, then next day it's telling you to stop because the tank is full even though there is nothing in it and no grain near the sensors, we have checked easily accessible wires and plugs and swapped the...

Hi, is anyone selling a merlo 35.7 in the next few months, notts, Linc's, York's area, must be very good condition, looking for a 15 to 18 reg ideally with no more than 4000 hours, if anyone is selling one that fits the bill then pm me cheers.

Hi, does anyone know what error code 1033 is for on a tier 2 6465 Massey thanks.

When using the independent brakes in the field the tractor after an hour or so puts up a warning light and buzzer, and also error code 14 01 09, I know it's to do with the brakes because of the warning symbol, stop the tractor and restart and it's fine if you don't use the brakes, anyone had...

Our new too us 7718 is jumpy on the reverse shuttle when it gets hot, forward is fine it's just when going in to reverse, can anyone let me know the procedure for calibrating the shuttle, it may need a solenoid but first step is try the calibration. Thanks

Hi, interested in a machine at prestige agri, and before we go on a road trip to look and seeing as we have never heard of them I thought it would be sensible to ask on here if people have had dealings with them, looks to be an OK company but you never know these days. Thanks

We have Spring barley and wheat going in this spring, going to put fert on in two applications, was thinking half in the seedbed and half when in row, we have straight nitrogen and nitrogen/sulphur blends but not sure what would be best in the seedbed, is the sulphur better going on in the...

have a conventional baler in need of picking up from ox25 4ab to dn22 0jz no real rush sometime over next couple of months will do so ideal if anyone is looking for backloads.

2010 onwards must be good condition, Notts, Lincs, area preferred, anyone looking at selling one in next few months.

Started rape today with our cx 820, sample is pretty poor, running drum at 580, concave at 40, rotary separator on slow and concave open, pre sieve shut, top sieve 6 bottom sieve 2, fan at 600, monitor losses seem plenty also, although don't trust the monitors in rape. Anyone else with a cx...

we have a cx 820 for this harvest and wondered where people set the pre sieve, will be cutting barley rape and wheat this time, the top and bottom sieve are adjusted electrically plus you can see the sieves easy enough, but you can't see the pre sieve very well and is set by a manual notched...

looking at a cx800 series, never run a new Holland combine before so any views on this series and what to look out for would be appreciated.