Would someone give a rough estimate as to the cost of the frame for a 120 by 50 foot span, 21 foot to the eaves building please? 15 foot bays.
Perhaps you have ordered a similar size building. Thanks
We have bought second hand set of steels. 50 foot span, with work can get the uprights to 21 foot with plates welded on the bottom. We have nine sections of these. Haven't got the size of the steels to hand but can come back with that.
Would like to store four of five products.
Anyone would...
Hi, I have been told about a sand blasting lance that will go on a power washer. Can these do a good job? Talking shed steels that need a good tidy. Thanks
Any owners or operators of the above drill on the forum? Any top tips for optimum performance? I'm reading the manual like I have to sit an exam on it but can't beat user experiences
Thanks
We have a few field gates that we want to put in place. Galvinised gates will be used and some railing will be needed each side. What to use for the gate posts?
I don't like the steel round posts that can be bought, or using the motorway crash barriers, ok for in field gates but for me don't...
Looking at bag lifters, predominantly for loading drills with 500kg bags. Unloading fertiliser second use.
What make gives the best use of getting the bars through the hoops, doesnt damage the bag hoops (cylindrical bars) and main aim in my mind is allows the bag to rest back against the frame...
I would like to sow grass seeds off a set of rollers. Seed would be blown back from a front hopper. The outlet on the hopper is 152mm.
I have found an accord distribution head and stack which is 100mm.
If I use 152mm pipe all the way from the hopper to the accord stack, and then use all the...
Have a small acreage which was pencilled in for spring barley but with for one reason or another would like to grow a crop with the aim to graze in August and early September and set up for a nice crop of wheat. One field has had a mix of beans and linseed and other bits and bobs. I have Mascani...
Hi, any user experiences of the Kuhn 4001 wrapper? Do they have any problems on steep ground keeping the bale in the right place? Round and square.
Any reliability issues?
Thanks
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.