Search results

My mistake the 64 series used to knock the diff lock out when you lifted the link arms and put it back in when you lowered them. i normally have diff lock on the H3 or H4 button on the black joystick then its easy to take in and out

Does the normal diff lock not come out when you pick up the link arms? Then come back on when you put them back down again?

The steering parts fine it's the receiver and the screen. Sometimes work fine one day and the next there's no GPS part on the screen. And then you can't get to any settings because there all in the GPS section that doesn't appear untill the dome is turned on so trouble shooting is impossible...

Currently running a MF 7720 and using its own built in Autosteer but it's not great to use and keeps playing up. I'm I right in thinking that I could get AGopenGPS to use the current in built steering valve via canbus for steering and wheel angle sensor. Then an imu for tilt and a board with...

Wrong person sorry I think myself and @Massey mad had very similar account passwords.

Are there many new farms still coming on? Will the bubble burst?

Is that a skidsteer to q fit adapter? I'll buy that if its available?

If that's the resettable hours then yes mine said it had done over 6000 hrs when we bought it ex demo with 400 on

Done that before just to keep us going!

Change the rubber seal in the bauer fitting on the sucktion side for a new one and try again before starting to take the pump in bits

Was thinking that if it has to be covered Id much rather a tower and would need to go and see the bank. If not I'll get planning in for a big hole in the ground and get it dug in a way that expansion is easy

Is it just those that are putting lagoons and towers up on a grant, that have to have them covered then?

We are contractors but don't really do enough to justify a shovel as buckraking would be the only job it could do. Most farmers help with rolling if the pits are big enough for two machines on them

Pushing from a 500 horse sp but most of our pits are small and awkward. pushing around corners and such. It would also have to feed up at the home farm and a 420 won't fit in our sheds

What do people find them like for buckraking, thinking of swoping a tractor out for one but don't want to get caught out with it not being man enough?

Think we took the chain box off and there was a clutch type thing that had worn so the chain wasn't driving shaft

Make sure the feed rollers are both being driven properly as well had some issues with our newer class and the bottom roller was just free wheeling. Trailer man spotted it looking back into the header while being filled

We are on the Lancashire Cumbria border and use Alan Robson ( I think that's his last name) 07554 401234 sure he will put you in contact with who you need

We run a 10 ton West on 550/45 22.5 there a lot better than super singles but our trailers on 60 profile tyres travel a lot better if they would fit

How much nitrogen do people put on there crops? We've put plenty of muck and a bit of slurry under the plough crop was planted three weeks ago and came up in 8 days.