Search results

Is anyone using the isoyl app and a KRM M35W spreader to do variable rate P&K? We have been using an old Amazone with amados control box but now need the wiring loom to connect up to the Calibrator Zurf control box, Our rep has left soyl and having no joy with the new guy!

Can anyone on here please tell me or show me the location of the OBD port on a 2015 model Agrifac Condor?

I have a Pottinger drill through a CCI100 terminal looking to use the same screen to connect up a camera for rear of trailers etc Anyone know of a cable to plug in to the video input and connect to a standard 4 pin camera? Cheers

The rats or mice ? have been in the wiring to the external up and down buttons. Unfortunately they have chewed the wires off to short to repair. Does anybody know what the connectors are called? Cheers

Good evening For years we have run a mixed fleet of tractors currently MF, claas, case, and John Deere . Now looking ar a 200 hp tractor and seem to be getting a decent price on a Valtra T194 Versue smart touch. I'm pretty keen on them tbh looking at 160l pump. 60kph. Auto guide. 650r42...

I am looking for any advice or input on using the iPad and Isoyl app, to control a Pottinger Aerosem Drill using the Expert 75 controller Can anyone confirm if this is all compatable for variable seed rate use? Thanks

We are in the market for a new 3M combi drill, decent spec, discs, ring packer, isobus etc The three options been looked at are, Lemken Alpego Pottinger Any ideas guys?

Have any of you guys had experience of changing bearings on a Knight triple press? We have the section removed and using gas we’ve undone the two locking nuts. What we are now struggling with is removing the outermost press ring to get access to the bearing itself. Looks like on some other parts...

can anyone please tell me what the fault code E52`1007 is reffering to, believe its connected to adblue cheers

Tuning Chips: Other - Category: Tuning Chips Manufacturer: Other Price: £500 Condition: Used Description: Massey Ferguson 7600 SISU Valtra Tier4a tuning chip [SIZE=2]This post was automatically created via http://classifieds.thefarmingforum.co.uk

Looking for some LED worklamps for the merlo, Its a new 42.7 machine but only got the poor halogen lamps The wiring has the Deutsch connectors if its possible to get something that plugs straight in?

This cold weather has proved the need for a new battery on our John Deere Its a 2004 common rail 6920S The old battery doesn't seem to have anything wrote on it, so whats everyones recommendations for model number and make etc? Cheers

Has anyone here got a new Holland LM7.42 elite? Looking to change our merlo and the local dealer is trying to get us into new Holland Doesn't look to bad a machine but id like some users info cheers

ive got a 7620 here that starts then cuts straight out. Error code e4792 Can’t find it in the operating manual. Anyone know what it’s for? Cheers

I have a selection of new and used tractor chip tuning boxes 2 x SISU Tier 4A tuning boxes, removed when tractors replaced with 7700 series. Been used on 7618 and 7620 but will fit any 7600 series or similar Valtra. New price £700 each but make me an offer. Brand new FPT Tier4B tuning box to...

On our 580 the cebis screen is reporting a "rotor speed adjustment module defective" Ive read you can swap the sieve and rotor modules to test them, can anyone point us in the right direction to locate them on the combine? Cheers

The right angle gearbox on our lexion 580 has chewed up the gears. Claas price is about £1600. Jmt do them for about £1200. Anybody know of a place just to get the gears rebuilt recut etc? Or a source to buy new gears rather than complete box?

I can remap nearly all tractors from the last ten years, services can provide on average around 25% power increase and 10% fuel economy gains, I can also offer egr off, adblue off etc Also for sale tractor chip tuning boxes

looking at a used mf loader. Does anybody know anything about a Massey Ferguson 898XS loader? I would like to know what capacity it is and what model is it based on I believe it's a quickie?

Anybody deal with these guys, been looking for a used Case and noticed they were not at YAMS this year and now seems like biggest part of there website is down