Search results

  1. Tim

    GS brown ltd

    Bought a tractor from him , good man to deal with
  2. Tim

    2m weed basket

    HI A chap in keeps stuff in our yard has this which he will sell . Would like £850 . It does all move would just need a bit of re-commissioning . Pin size 45-50mm does have bushes that are 45mm .
  3. Tim

    Dealer stickers from yesteryear.

    A few from the old man’s collection of clutter !! Hopefully can see most of them
  4. Tim

    AC Jackson Building

    We had a building from them last year . ( livestock building ) Could not fault the building or the lads who put it up . Top job
  5. Tim

    MF6490 - Replacing radio aerial

    Think when we did one we took the cool box out , only couple of bolts . Pulled the radio out and it wasn’t to stressful 🤔
  6. Tim

    New toy day

    Not yet ! Was going just to keep it until we got going with the new one and will then sell it
  7. Tim

    New toy day

    Yes , to replace the West .
  8. Tim

    New toy day

    Same to get it dirty
  9. Tim

    Torches

    Hi Open to suggestions/ recommendations of a good long range torch for night time patrol and poacher spotting . Tia
  10. Tim

    Bateman rb35 re furb

    Hi RB35 9000hrs just had Bateman do a chassis refurb before Christmas . Took it to bits and replaced everything that was required . Axles bushes , pins , track rod ends , side arms , hubs and any hoses . They also did pump drives , fan belt , hydro cable and any thing that has been modified...
  11. Tim

    Shelbourne Reynolds power spread pro

    Hi Looking at new muck spreader options to spread cattle muck . 50 / 50 split of yard muck and loose housed straw beds . Been a West dual spreader up to now . Looking at different spreaders and thought about going to a rear discharge , but have spoke to a local rep and he has suggested a...
  12. Tim

    Wooden bearings forAgrimec flat roll

    We have just made some from some hard wearing plastic blocks as a bit of a experiment .
  13. Tim

    The what I f^cked up today thread...

    BUGGER ! At least it didn’t take the fence out [emoji34]
  14. Tim

    Hydraulic fitting

    Hi all Can anyone identify what the name / type of hydraulic fitting this is ? It’s from the spool block on a MF 690 . It’s a swivel and is retained by a u shaped retaining clip . Tia Tim
  15. Tim

    Torque wrench

    NORBAR 4R 3/4 inch drive torque wrench new in plastic case .] £275 can post at cost
  16. Tim

    Air con compressor for MF6470

    Try this company . Very helpful ! www.ama.ac
  17. Tim

    Tools: Other - DeWALT

    Hi Would you mind posting ? Kind regards Tim
  18. Tim

    Ex Lease Cars!

    Hi Guy Any Discoverys around ? Cheers
  19. Tim

    Browns wrapped bale squeezer

    Round / square bale squeezer . Fitted with MF loader brackets . All straight £450 Ono
  20. Tim

    MF 30 grass box wanted.

    Hi Are you still looking for a grass seed box . I have found one . 104 inches long Cheers Tim
Top