We bought a new Kuhn 6501? twin rota rower in 2008 and up to this year it has been faultless. However this summer we had to strip one rota down and renew the cam track and bearings. The total bill was about £1400 (parts and labour). Over the years the machine has covered a lot of acres,many of...
Just started in some Kingsbarn hybrid WB. Horrible sample with thin,pinched grains, probably due to the lack of rainfall and BYDV. Averaging about 7t/ha. Very disappointing
We've had 2 break on our Kuhn tedder this year. Their right sods as the roll pin is tucked up inside the casting making it impossible to knock in with a punch. We borrowed a hydraulic portepower and used the jaws to squeeze the roll pin into the hole.
Finished spraying Univoq today, thank goodness. Bloody horrible crap. Learnt the hard way it works best at 200 litres with flat fans. Its knackered 2 DCVs on the end nozzles but I'm worried what damage its caused internally. Never again will I put that stuff through my sprayer
I purchased a new Team 'Arion 2' vertical fold, 24m sprayer last year, having used Amazone mounted sprayers for the last 15 years. I was determined to buy British so I could speak to the manufacturer in case of trouble and it was considerably cheaper than the equivalent Amazone.
So far I have...
Try these settings=
Pre sieve 3/4 open
Fan speed 850 rpm
Top sieve 15mm
Bottom sieve 10mm
I always struggle to stop NH combines from throwing barley out the back, no trouble on wheat though
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.