Search results

Thanks all. So after reading your comments I've opted for the 220+ with; 300kg weight Hydraulic side tilt rock spike and controls on the machine. Many thanks

Does it save alot of time? I'd thought that we'd see how we got on with manual and then retrofit later if needed.

Yes I do like the look of these. Tell me, is the spool block on the knocker an extra? And the white disc I can see, is that the rock spike slotted into the frame? This looks like the setup I'm after.

How well are they made? I found them online but have not seen them in the flesh. I'd be looking at a basic telehandler mounted machine with rock spike and side tilt. I'm also looking at Protech 220+ with heavier weight and manual tilt. Any thoughts?

Still using Mid wales log burners and flues, as listed above.

JCB have developed hydrogen ICE. They're running loadalls, fastracs, diggers, excavators, a Mercedes 7.5tonne lorry and a Mercedes Sprinter. Watch the Harry's farm video below for more details of how refuelling etc.. works.

Thanks all. I have completed the task.. It's going to be very much a fingers crossed thing over the next week or so. I have levelled it out no more than about 1.5 metres deep on the shed floor, so hopefully less chance of hotspots. I will try to get a dosing pump setup ready for next year.

I'm treating some barley with propionic acid. Does the barley need sheeting? I've never tried this before. Plan to spray over a bucket load tip out and mix, then start again...

Update. I phoned RVT last Monday morning. Ecu on the front of the engine. Water had got inside one of the plugs. simple fix, contact spray in the plug. All works like a dream again now.

Well I only had the JD manual which doesn't supply all the error code etc.. I found on another forum since posting this one, a link to Kvernelands operation manuals. So I've just read on here that I need to check battery, (which I did earlier, I'm getting 12.68V to the plug) And check...

Does anyone know of a Youtube user guide for this monitor. I've been busy making a mount for the tractor half the day and although I've read the section in the user manual on the Signus, I can't quite figure it out yet...

Thanks. I’m hoping all will be ok today! If not I’ll follow your advice.

I drove my loadall into deep water today to move a fallen bough from the river. The water engine revs went up all the way and so I have parked it up to dry out. I presume the throttle is fly by wire and that I’ve managed to cause a short circuit. Anyone come across this before? 2007 JCB...

I am buying a 3m John Deere 750a from Pocklington York. Ideally I’d like it delivered before the end of March. Do you think you’ll be needing another backload by then. David Morgan strefford Hall Farm Craven Arms Shropshire SY78DE The A49 goes through the farm. Buildings only 200meters off...

Basically what I told Horsch UK this morning. I told him that they've priced themselves out of the agricultural market.

My spec includes bout markers, seed flow sensors, so it’s spec’ed higher than I wanted. Without terminal, which I presume means it’s Isobus only.!.! £81450 nett Discount brings it down to £74900, just checked!!! TAG Leominster. I’m buying a used 750a which has been very well looked after...

Limits more than met here. Just had a quote of £74,500 for a 3m double tank Avatar. The previous quote was for a single tank back in Oct 2020 @!£51000. Is that inflation or the fact that there are grants of £25k available now?!?!!!

Just picking up this thread. I’m interested in fitting RDS to a 750a. What sort of cost would it be? My tractor doesn’t have iso.

Thanks all. I feel much better educated to kick some tyres now!! I’ve watched a few Needham YouTube videos, which confirms what you’ve said. Cost wise I guess buying a worn out drill needs to be at least £500 per row cheaper than a well fitted used drill.

So I’m looking to buy a used 750a and would like some advice on what wears. I understand that the disc will wear down to 17” and then need replacing. Seed boots have been mentioned on here as being a wearing part. I guess I’m asking the question; If I buy a worn out 750a, what parts will...