Search results

  1. D

    Dual wheels for a 435 s jcb

    Looking for some duals for a jcb 435s Shovels on750/65r 26 Thanks
  2. D

    Kvevneland 4 metre gearbox

    Ok I probably try my local earring supplier
  3. D

    Kvevneland 4 metre gearbox

    Yeh that’s what I’m thinking What oil and amount is best for the these gearboxs Does it say a bearing size in the parts book
  4. D

    Kvevneland 4 metre gearbox

    I’ve got the shaft 14 out I think I’m going to try and cut the bearing race off the gear maybe I’ve found 14 of the bearing rollers so need a good fish out
  5. D

    Kvevneland 4 metre gearbox

    Looks very similar It’s bearing no 38 that has gone that goes on pinion no 37 I can’t get that out of the gearbox to remove the inner bearing race
  6. D

    Kvevneland 4 metre gearbox

    It’s rigid one gearbox I will check model in the morning and take some pics I’ve got I partly stripped but it the bearing on the pinion that has gone
  7. D

    Kvevneland 4 metre gearbox

    I’ve got the front bearing knocked out it the bearing race on the pinion gear I cant get the pinion out
  8. D

    Kvevneland 4 metre gearbox

    Got a bearing gone on the pinion gear started stripping it down Hoss we do u get the pinion head out to remove the bearing Any help
  9. D

    Duals for 435s

    Looking for set of duals to go on a 435 d jcb
  10. D

    Looking for some dual wheel for a jcb 435 s

    Looking for some 26 inch duals to go on a jcb 435
  11. D

    Dual wheel for jcb 435 wanted

    Hi there Do u use the wheel nuts for the eyelets Do u know what size they are
  12. D

    Dual wheel for jcb 435 wanted

    Do u know of any Who makes the spacer
  13. D

    Dual wheel for jcb 435 wanted

    Looking for dual wheels for a jcb 435 s Need to fit against 750/65r 26
  14. D

    Fish rearing up setup

    6 rearing tanks Filteration system Single phase water pumps Simple system to run £9500 07703725420
  15. D

    Purewell fish rearing set up

    Hi there The system isn’t set up I lost the building and farm It’s in middlewich in cheshire
  16. D

    Purewell fish rearing set up

    Fish rearing set up 6 rearing tanks filteration tank Filter wheel 2 single phase water pumps Very simple set up to use Very good condition
  17. D

    Joystick and valve block on 7530

    Mid mount means inthe middle of the tractor ie under right hand steps Joystick mounted above like a loader I’m looking for two or three double acting sections
  18. D

    Joystick and valve block on 7530

    Looking at putting a joystick and valve block mid mount Does any know what Lpm flow I would need seen some 40-60-90 litres a min ones Or has anybody got anything laying about Cheers
  19. D

    Mid mounted valve block and joystick

    Hi looking for a mid mounted valve block and joystick to put on my John Deere 7530 Doesn’t have to be a jd version Wondering if anybody got on laying about Thanks
  20. D

    McConnell 1.2 or 1.5 flail head wanted

    Looking for a used 1.2 or 1.5 muilti cut Flail head the one with the sliding head clamp Thanks
Top