Evening all,
looking to buy sabre tine legs for a project. What are people’s thoughts on them? Do they wear well, reliable into uncultivated ground etc?
cheers 🤙🤙
Evening,
Looking for an old orchard sprayer chassis and fan for a proof of concept project. If any one knows of some thing going cheap let me know. Looking mostly for the fan assembly and frame.
🤙
Evening,
Having trouble finding the correct nut that holds the hub on the bottom of the gearbox on a 6ft McConnell rhino. Any one know if it’s specific size of nut. Standard castle m24 fine thread doesn’t seem to fit the gearbox. Bought a 1” unf which doesn’t fit either. Seems to be 25mm on the...
Evening,
Looking for a headstock or two for a project, some thing off a buggered flail, either front/rear mount or just front similar to the one in the picture. Can’t find any one to bend rectangle box.
Just bought a fella km250f, she is of an age, theres no info saying direction of pto or pto speed.
Being a drum mower there aren't any gearboxes so guessing 540 but front pto normally is 1000 rpm.
Guessing anticlockwise sitting in the tractor seat for pto direction. Any help appreciated. ?
Evening,
I’m Looking for a 2m toothed style packer roller for a project direct grass seeder I’m looking to make, If any one has some thing sitting in the hedge, gathering dust etc I would be interest if sensible money. [emoji106]
Not mine, just seen on Twitter, pretty sure I’ve heard of manitou rams splitting before. Maybe on here. Not good though, they don’t make the rams but surely after a certain amount of time they should be checked irrelevant of brand.
Morning,
Just put a new tacho in to my dads little 35. Do they need calibrating? Reason being, throttle wide open only just goes to pro speed(1600 ish) but not to belt speed. Old one that was buggered went all the way round. Wrong clock perhaps? Any advice greatly appreciated.
Thinking of adding a turbo to the dx3.9 has any one done this? Not looking for huge power gains. A bit like the turbo added to the old massy 698. Is there much that needs doing to allow the engine to cope. It might be a non starter but interested in exploring the idea.
Manifold that directs the exhaust through the bonnet of my deutz dx and the price to replace was silly. Decided to take the opportunity to move it to the pillar.
Hasn’t taken to long to do. Made my own pillar silencer with a slight pedantic deutz cab shape. all parts made, mocking up location...
Asking for a friend, he needs to swap out two bearings that have failed. Any one have knowledge of stripping the 205-805 boxes apart? I haven’t seen it to see what’s involved. Cheers.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.