Search results

  1. cornishfarmerjohn

    Blocked pipes in accord

    Thanks all, I'm going to try driving slower and upping the fan speed to 4200rpm. But thinks it's probably awns on seed.
  2. cornishfarmerjohn

    Blocked pipes in accord

    Somewhere in the middle
  3. cornishfarmerjohn

    Blocked pipes in accord

    As above, trying to get my spring barley finished (yes it's the latest I've ever done but the ground is only just dry enough now!) Pipes keep blocking, not coulters or distribution head. No Sag in pipes. Fan running at 3900,rpm. I'm at a loss to know what is happening and it's driving me...
  4. cornishfarmerjohn

    Plastic or steel fuel tank?

    Hi all, advice on the above needed, is a steel fuel station worth the £600 extra over plastic? I'm near the coast in Cornwall so rust is concern however it's also pretty bright sunlight here too. Please help sway me one way or the other! 😂 Thanks
  5. cornishfarmerjohn

    Oxford to Cornwall

    Needing to transport a seeder from Oxford to Cornwall, anyone going that way or back?
  6. cornishfarmerjohn

    Lambing prep

    Thank you all for your replies, I've decided I've been way too fussy over the years.
  7. cornishfarmerjohn

    Lambing prep

    Hi all, just after some advice, lambing starts for me at the end of the week. Unfortunately for various reasons I'm behind with getting everything ready. Normally a pressure wash each hurdle both sides that I use for the individual pens. Just wondering if everyone does this? Or am I going over...
  8. cornishfarmerjohn

    Xero

    Hi, so if you get a invoice via email, will xero pick it up from your inbox?
  9. cornishfarmerjohn

    JD 1177 header height control

    Thank you very much will have a look
  10. cornishfarmerjohn

    JD 1177 header height control

    Hello, all, I need your advice please. My 1177 header height control is very temperamental. I've changed the switch on main control handle but not made any difference. Any one else has similar trouble? I'm guessing it could be solenoid /valves? Thanks in advance.
  11. cornishfarmerjohn

    Need a Rotavator

    El 81
  12. cornishfarmerjohn

    Need a Rotavator

    Have done 4 times now, breaks somewhere different
  13. cornishfarmerjohn

    Need a Rotavator

    rotor snapped in half
  14. cornishfarmerjohn

    Need a Rotavator

    Hi all. I need a new rotavator, we have rocky ground, old one is a kuhn, just wondered if anyone has any recommendations? Any one run a Maschio? Thanks
  15. cornishfarmerjohn

    Mengele shearbar set up

    Thanks for your help
  16. cornishfarmerjohn

    Mengele shearbar set up

    Thank you mengeleguru. What is the best way to shim out the bottom of the shearbar? Thanks
  17. cornishfarmerjohn

    Mengele shearbar set up

    Thankyou, but how do I get it more vertical/forward? Many thanks
  18. cornishfarmerjohn

    Mengele shearbar set up

    The blades will touch the top, but not the bottom edge which is where the cutting edge is
Top